What Have You Done To Your 3rd Gen Today?

Got a Retrax MX cover installed. No pics because I ordered the XR… dealer is fixing it.

 

It's my daily, so there is this to consider. I've been upnin that area at least once a month since I brought it home. I'm really just thinking I want a little less of a stiff ride. Roads around here aren't exactly well maintained. Unless maintained is poorly filling in potholes with smaller potholes, then pouring rocks in them.

 

Good looking cut on the bumper. Can you upload a better pic of the bumper in sunlight?

 

yea I didn’t end up parking in any sunny spots. But I’ll get a few pictures in a couple of days when the sun comes back out.

 

Finally got my wheels/tires/tpms sorted and installed. So much better...
Put in an RC speedo calibrator and installed screenprotech film on the dash cluster.
According to three different gps apps, the 265/65 17s were reading 2 under and the 285/70s were ~3 over @ 60 mph.
Got it dead on with the calibrator, first try.

 

Replaced my stock wheels/tires with SCS F5s and KO2s. 265/75/16s

 

Installed the front two days ago but re torqued everything today. Figured out there’s a clunking from a seized sway bar endlink nut on the driver’s side. Going to remove the sway bar and see how it drives, if I don’t feel comfortable with it I’ll reinstall the sway bar and replace the endlink on both sides while I’m at it. Installed the rear shocks today and it took a lot longer than expected so wasn’t able to install my leaf pack. I’ll be tackling that tomorrow

 

Nice job on the cut! This bumper is so gorgeous. Definitely the bumper I'm going to end up purchasing one day

 

Do you hear the clunking when turning at very slow speeds? I think I might have the same thing

 

Got some wood today lol

 

Installed a Baja S2 Pro in the rear bumper to act as a dust light. This should minimize the risk of being rear ended while running trails with friends.

I cut the hole using a carbide blade on an oscillating multi tool, and I had already run the wiring and switch/relay when I installed another electrical project some time back (in anticipation of wanting to eventually install a dust light). I still need to swap out the lens for the combo spot/flood. I couldn't find that S2 Pros in stock anywhere, and when I finally found a place that had one, they only had this "work/scene" lens, so I ordered the combo lens separately.

 

You’re just hanging in the wrong spots! Plenty of green in AZ too
1. Granite Basin Lake
2. Hannagan Meadow
3. Greer
4. Mingus
5. Wilhoit
6. Lockett Meadow/SF Peaks
7. Lemmon
8. Dobbins Lookout(even Phoenix can be green)
9. Williams
10. Mogollon
11. North Rim
12. Oak Creek Canyon
13. Old Route 66
13. Crown King
14. Hawley Lake

 

I was just about to ping you, but then I realized it was your post.

Everybody should consider keeping

$10 Slime 1034-A Tire Repair Reamer Plug Kit, Medium Heavy Duty Strings, T Handle Type and Plug Bond, 8 Piece Set

this for $7.51 (or something similar) in their truck right now! Replacement plugs

$7 Slime 1031-A Tire Repair Plug Pack, Standard Heavy Duty Strings, for tubeless Off-Road Tires, Such as ATVS, wheelbarrows, Lawn mowers, Trailers, Pack of 30

here.

 

Yes sir

 

Having some fun on this thing

 

Yeah when hitting bumps or imperfections in the road at low speeds I hear it.. lifted the truck and took the tires off and realized it was the sway bar end link on my drivers side that came undone. It’s about 4 threads loose and won’t tighten or come off.

 

Have you taken the sway bar off and driven yet? Pls lemme know how it goes.

 

Awesome speakers, that is what I have and they thump even with the OEM radio. In the middle of upgrading the rest of the system right now, I should be done today finally

 

Yesterday started the rest of my sound system install. Ran all my wires (speakers, power, etc) and fabricated my Amp rack and pre-installed it. I should be able to finish today......Inshallah

 

Beautiful sceneries!

Thank you.