Seat Belt Beep

The search option isn't working on my computer, but can someone please point me in the direction of how to turn off the seat belt beeping noise?

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/38842-disable-seatbelt-warning-chime.html

http://www.tacomaworld.com/forum/2nd-gen-tacomas/139914-2011-seat-belt-chime-mod.html

what i did was unplug the wire under the steering wheel.. that disabled the chime all together along with the chime frmo the key in the ignition w/door open

 

1) Turn the Car 'ON', but do not start the engine (Leave your foot off the brake). Cycle your trip reset knob until it reads ODO. Turn the ignition back off. Wait a couple of seconds.
2) Make sure seat belt is not fastened
3) Turn the ignition back on, do not start the car (Leave you foot off the break) As soon as you see everything light up, press and hold the trip reset knob and do a long 12 second count.
4) Keep your finger on the trip reset knob. Fasten your seat belt, as soon as you fasten your seat belt, you should see the ODO display go from XXXX miles to "b-on". At that time take your finger off the trip reset knob and press it again. It should cycle to "b-off". You should be all set and turn the ignition off and unfasten your seat belt.

 

wear you seatbelt.

 

Awesome, thank you!