N2 Designs Remote Start Questions

Got it! Seems to be a pink wire since 2020. Am I leaving it just bare and exposed?

 

you strip it and you connect each end to one of these that was provided.


N2 Designs 2016-2022 Tacoma 3x OEM FOB Plug n Play Remote Starter Kit (AT & MT) + Smart Module | Page 33 | Tacoma World

 

Nope. Both ends need to get connected to the remote start.
The connector in the picture above is a little different from what N2 shipped back in 2018 when I installed mine.
Either way, there will be two wires coming from the remote start module that need to connect to each end of the cut wire.
Good luck.

 

You should have something like this

 

This is helpful! Thank you!

 

Okay so I'm lost again. I have a connector coming off my ignition that goes nowhere and a connector off my obd2 port that goes nowhere.

 

Oof. Wire popped right out of my tpms harness. What do

 

Also connectors in question:

 

SOS. :^)

 

Probably for accessories you don't have. Different levels of trim, use same harness.

 

Your going to have to re-pin it in connector

 

Just follow instructions or call N2. They will walk you through it. Should be a 20min install.

 

Painnnnnnn, I've never used these connections before.

 

Fixed the connection, still have two connectors needing help.

 

i think this one goes to the black box once its ready to connect. read the instructions.

 

Got it sorted, turns the truck on. FOB doesn't unlock/lock anymore. Is this a tpms wire issue? I wasn't able to strip the part coming from the module the best as theres almost no room.

 

Also truck won't turn off.

 

Yes

 

Something is not connected right. Recheck your connections.

 

did you press the LOCK button 3 times? Have to press them kinda slow.