What Have You Done To Your 3rd Gen Today?

Same

 

Yup, me too, easy-peasy...

 

I learned early on to use the right tool and a quality one. My Dad only had a flat head screwdriver, carpenter hammer and plain slip joint pliers when i was growing up. He was always trying but making a mess of things.

 

What's up with the falling trees?
My K2500:

JD Compact (not mine, 3 series I think):


Nice GSD!

 

Hello,
After waiting 8 months for parts to come in from Toyota to fix my rear end damage, I decided to dump Sliech auto boy from Agawam, Mass. and go to Vermette Auto Body, they were able to get in all of my parts in less than one week, this goes to show you who follows up and who doesn't give a crap about you. truck goes into the body shop on Monday for repairs. And another cool thing is they give you an id # and you can watch the repair online anytime you want to see its status. and they saved me money too, because they can fix the body panel and they got me reimbursed for the sensor I purchased too.

 

Victory!

 

Thanks for the response. It might be a little tight with the 1" lift that comes on Trail

 

Done! Just ordered one from AJT.

 

#3 Philips was what I used and it was a 90 second job start to finish.

 

Not the OP.
Just a suggestion on removing a screw that has never been removed.
After working on several HP multi-function laser printers containing several hundred screws I learned that if you tighten the screw just a bit then that is enough to break the seal and then it will loosen without stripping the Phillips head.

 

Added APS Drop Steps and a touch of color on on the front license plate.

 

It’s rad how you dog is guarding your favorite things.

 

Thundercats What a childhood. Simpler times.

 

Screw it and just use the stock gasclit Toyota gave us

 

With a name like that, it's no wonder it's so difficult for lots of people to find.

 

Can you give me a measurement on the two mounting bolt holes for the handle?

 

6”



from here: https://cdn.shopify.com/s/files/1/0084/3680/9788/files/grabHANDLE_2.0_PDF.pdf?v=1676592830

 

Sweet, Thank you!

 

good ole SB!- from there! currently in south FL_

 

Lol hes a great dog .