What Have You Done To Your 2nd Gen Tacoma Today?

Making a mount for my switch panel. It’s not 100% but it’ll do.

 

Question about the Desert Does It seat jackers… if only lifting the front, does that compromise the rear bolt angle to the seat bracket? I’m just thinking if you lift the front then that changes the angle of the rear bracket so does it not sit flush? Is that an issue or don’t worry about it?

 

you will be fine, ive had no issues with then angle at all

 

Awesome, thanks!

 

though if you go to the website they do make some shims if you want some adjustment to the rear height of your seat

 

thread may help:
https://www.tacomaworld.com/threads/fox-cos-top-plate.119661/

 

I just saw your video! Subbed your channel not too long ago. Nice job on the rims. They look cool!

 

I did try to flip it but that made the shock to long to fit into the lower control arm but like 3 inches.

 

Further in the thread the OP states he leaves them inverted and installed with different or ground Allen bolts or something and it seems they were for a 1st Gen taco.

 

Yeah I called Fox and they said that is not the right bolt but of course they just closed before I could order a new one.

 

Yeah no way in hell to get this bolt threw the tower. Gonna need to order new hardware

 

Rockstars belong on dodge rams. New wheels look sick

 

So I was doing the knock sensor wire harness repair (chewed wiring) and I see this on the intake. The top right port looks alot cleaner than the others. Any ideas why? Plugs, injectors, seal?
Any suggestions appreciated.

 

Cleaned the engine bay because it looked like the rocker panel. Forgot to take a before picture of the engine.

 

Link to the struts?

How are the HF cases?

 

Your top hat is upside down my dude.

 

It’s an old fox shock similar setup to the old pre-Icon Donahue racing coilovers. The top hat is designed that way. That being said whoever had these shocks wasn’t running them on a 2nd gen.

 

$21 Vepagoo C1615053 12" 20Lb/89N Gas Shocks Struts Spring for Truck Pickup Tool Box Boat Deck, Weatherguard CSPS Aluminum Toolbox are Topper Camper Shell Side Window, 2pcs (1 Pair)

Here are the struts I'm using with them, I found 20lbs to work better than 10lbs. HF case has been on a couple weeks now and haven't had any issues, just had a hard thunderstorm for about 2 days and it didn't leak at all so i'm pretty content with it. I got it on sale back at the beginning of February so only $129 VS a Roam or Pelican case which would be at least double.

 

I read someone talking about that in a different thread. I ordered some new hardware and we will see if I can make them fit. If not I'm running my nitro chargers for a bit longer.