What Have You Done To Your 3rd Gen Today?

Following; I want to do the same. The overlays I've seen (which would be really easy) make the logo look distorted. I just want to get a bit of the shine off.

See also: https://www.tacomaworld.com/threads/steering-wheel-emblem-blackout.698909/

 

I’d assume it’s a nightmare to remove since it’s on the airbag cover and they wouldn’t want it to ever come off.

 

Just get a cover off of Etsy! Way easier and they have them in Glossy/Matte.

 

Got one sides limit strap, hydro bump, and resi mount in today.

 

Harbor freight jacks are some of the best out there….

 

Hacksawed down my Thule core bars so the windoors on the Leer can open all the way and built part of the sleeping platform!

 

Finally put on the velcro (kind of half assed) for the bedrug and figured out a workaround for the bed stiffeners. Cut off the 'flap' for the bed ring and it'll sit pretty flush.

 

does your front slider have the little "handle" on the inside so you can slide it open from the inside?

 

yes it does!

 

I just noticed that mine only has it on the outside.

time to hit up the topper place and ask…

 

Picked up my OR DCSB on 02/25/23 and added a backflip mx4 bed cover as my first mod, technically second mod if glovebox and center console organizer counts.

Was thinking the wife was going to be upset about the mod$ I had in mind but with out mentioning anything to her she suggested the bed cover and rails/steps.

thinking, bed mat, oem bed step, and rails as next mods, and eventually full LEDs once warranty is up.

 

Not the OP.

Honest opinion on the Weboost. When I talk to people out in the woods who have one, many of the complaints come from individuals who do not understand what it does. It seems many people thought it would create a signal so they are disappointed to find out it will not create a signal. What it will do is enhance a weak signal to make it less weak. Thats it. If there is absolutely no signal, you still will not have one.

I use mine weekly for work and can say that in areas where I had very little to no signal, I now have enough to get by. That is extremely helpful as I need to update data keys for entry into homes. Before I would have to drive to areas with enough signal, now I do not have to do that anymore. So, big fan here.

 

Cool

 

Ordered via Etsy and received a set of Glare Blockers (for the license plate lamps / reverse backup camera) for my '22 TRD Sport.
These are made by Pretty Darn Good LLC (PDCLLC).
Here's the link:
https://www.etsy.com/listing/1435971649/glare-blocker-3rd-gen-tacoma?click_key=20c3c9b8147211c65b54cf12ded0fc4060cb5947:1435971649&click_sum=e95d961a&ref=search2_top_narrowing_intent_modules_tabbed_price_bucket-1

I feel this is a reasonable cost for pre-cut ABS for this purpose. Sure I could have made my own, but this saved me time and effort, and I like to purchase from people that create products for the Tacoma.
Very pleased with the product you offer Tim! Thanks!

 

Thanks! Any issues with them please let me know!

 

I got scammed on a seat of aftermarket headlights 400 bucks

 

There is a thread on removing the emblem here

Looks complicated, I went with an overlay from Amazon which is apparently no longer available. TBH since I put it on, I don't even notice the emblem so I guess it served the purpose. Looks good, not bulky or awkward

 

Nice setup!!

 

My Bakflip rods come loose too easily. What is the diameter of your prop rods? Can you narrow down the source of your holders?

 

Installed mine yesterday too.