Official* New England Buy/Sell Tacoma Marketplace

It is and we have plenty of f2f buying and selling. Way less crazies and flakes here.
Come bs in some local threads and you'll be to 50 in no time.

https://www.tacomaworld.com/threads/new-england-b-s-thread.204874/page-9734#post-28560507

https://www.tacomaworld.com/threads/new-england-mod-meetup-thread.762539/

 

Beat me to it

 

Not by much!

 

Anyone want or need a full set of 2nd gen OR wheels- including steel spare. Has Tpms but original to the truck and assume the batteries are towards the end of their life. Wrapped in wildpeaks 265/75R16- but one has a decent gash and are likely also towards the end of their lifespan so I wouldn’t run them. Asking 200 obo. Located in Canton CT- 06019



Edit- Sold

 

Is there anyone interested in a set of OEM roof racks off a 2017 Double Cab. Would be willing to just swap the roof racks for someones weather stripping (assuming good condition).

 

Looking to sell a new 3rd gen 6ft tonneau cover w/ all hardware, $400

 

Or any "Is my Tacoma totalled?" thread for that matter.

 

Matter of fact I’m about to try to make a sale.

 

Wanting to sell. 4 tires/ rims. Balanced and aired up.

245/75/16 Master craft Courser MSR with about 8/32 tread depth. One tire plugged.
Here are my pics.






Bought from a coworker and have used for two winters. Can get some more winter uses but I got a set of wild peaks AT3s and won’t need to swap anymore. I hope.

The rims are in the same condition as I got them and never really bothered to clean them up.

$150 is what I’m asking or b/o pick up or will deliver within reason


Knocking it down to a $100 . Just want to get rid of them

 

Bump

 

I have my old (around 4 years old) headlights for sale. They are 2005-2011 Toyota OEM TRD smoked chrome reflectors. These are just the housings, so no bulbs/sockets or seals are included. They are not the TSB version, as they still have the plastic lense for the turn signal bulb (my truck does not DRLs, so no issues with melting). All of the tabs are intact, the only issue with them is the lenses at the top of the housings are starting to fade (that is why I replaced them, as I feel like the lenses failed WAY too fast even with regular washing and applying carnauba/ceramic wax!). They could be cleaned with compound/polish or some wet sanding.

I am looking to get $250 for the pair and am looking for someone local for pickup/meetup (I have the Toyota boxes from my new headlights, so I could ship these, but I would prefer not to.)

Pictures:

 

Anybody with a 3rd gen access cab utility package wanna swap me for my jump seats?

 

Bump. Forgot to mention, also have full set of lugs included locking lugs and key that will come with the wheels.

 

It’s tempting. How difficult is the swap ?

 

If it's anything like 2nd gen it's super easy. Few bolts for the seats, pull the wall panel off the clips and remove the headrests

 

I think it should be pretty easy, it's just bolts, there is no electrical to worry about.

 

Don't forget the seatbelts will be the biggest time chunk. There's no SOS, the seats just bolt on and off super easy. Get some extra bolts, when I removed mine (double cab though), the bolt holes just go into the outside so without the bolts in there, you have an open port to the outside....

I have never done this swap before but I imagine there's just some bolts behind that access panel to move the seatbelt over to the other truck. Found this thread though:

https://www.tacomaworld.com/threads...ar-seats-w-belts-panels-hardware-sold.434508/

 

Fluid Film time again https://www.tacomaworld.com/threads/spring-2023-fluid-film-on-demand-granby-ct.797615/

 

ECGS bushing tool $30, located in West Boylston Ma

 

SOLD
2020 TRD grill, no TSS sensor