What Have You Done To Your 3rd Gen Today?

What size of Tires?

 

they just randomly started working again. I didn't have to take anything apart this time

 

2020+ TRD Pro taillights are the best looking tacoma tailights on the market. Looks so much better than the other OEM taillights and other aftermarket options in my opinion.
I installed mine over a year ago and I love them

Here is a pic I took of my white tacoma parked next to a 2017-2019 TRD Pro with the previous version of those taillights

 

Loose wire, randomly touching ground. My guess. Verify all wires wrapped/insulated, nothing exposed/insulation-cut while feeding through holes.

 

Subject to opinion of course. I liked my pros but eventually ditched them for all reds with black reverse bezel. I think the reds look better, though I did like both. I think what bothered me about the pros was the clear lens. I found it a bit weird looking. But they do well on a few of the colors. I mostly got rid of mine because the black didn’t make sense - I have no black on my truck anywhere else.

 

I'm thinking its a ground issue. Relays are grounded to the metal relay holder, and the negative part of the cables are grounded to the chassis. The wires are well insulated. Both circuits failed at the same time

 

265/70 R17

 

You’re welcome! Also, I have not updated the firmware and it works. I have never needed to unplugged/replugged the adapter. Only update it if it doesn’t work properly.

 

Agreed! I am going for the OEM+ look. Now I am on the hunt for some 2016-2019 TRD Pro headlights, as I actually like those more than the newer, redesigned ones.

 

Lol... Be prepared for more troubleshooting later on..

 

Can also get a non pro set or TRD / Limited and below

Retrofit and BHLM Headlights | Tacoma World

 

I feel like July also? I'm not certain. I know they generally run a sale around the winter holidays or just after. Keep an eye on this forum...
https://www.tacomaworld.com/forums/deals-coupons.28/
..folks will usually post stuff in there.

And correction, i found mine for just under $290 not $280....but still.

 

Sweet man, will do. Subbing now lol

 

I got the windows tinted this morning and installed bed lights.

 

UCA’s

 

Changed these puppies out today and man driver side is a major pain in the ass. Remove the clips is my advice. They are hard to move but make it much easier to get to. Anyway here is my old plugs vs the new. 149k miles

 

Figured I’d post it here since the rear metal bumper thread is deadsies…

Sooo I was not looking for a rear bumper at all. One of those couldn’t pass up this deal type of situation.






Maybe someone can help me out. Looking to replace the rear lights it came with. Something plug and play, that will be wired to an OEM or equivalent switch. Just cause they’ll only be used when needed at campsites or rural areas where more light is needed.

light dimensions seem to be 3x3.25 or so.

Also I have to source some sensor caps as my truck was not equipped w that…

 

cant see it, but got the OTT tune today.... it's awesome.

 

Replaced my key fob with the Meso Customs V2 Fob, to be able to keep my physical key in the assembly. It feels sturdier than the OEM and it's a bit smaller as well.