Has anyone that put a 3" lift on not needed new UCA'S?

was wondering if anyone has had any luck with the align shop after lift. going to be putting 3" toytec lift in my 05 with 5100's and really didnt plan on spending the 650 for the total chaos UCA unless its necessar im not a hardcore offroader or anything. but if i need them i guess i will just get em. But i wan to know if otheres witht the lift didnt need them and there truck goes good or not? Any light on this subjec tis wanted thanks

 

I have OME 885's and matching shocks and stock UCA. No problems with 265/75/16. The tires are very close to the UCA but no rubbing.

 

you will not have luck with the alignment, but it will work for a while, even longer if its all high way except for tire life, check out this thread.

 

I didn't get a full 3", maybe 2.5" no spacers. My alignment is fine.

 

I'm running the toytec 3" w/ 5100's in the front. 265/70/17 tires. The stock UCA's rub on the springs, and the tire rubs on the UCA. This doesnt happen with normal driving, only when articulating. I plan on getting new UCA's when I have the extra cash to throw down..

 

Dunno, the guy at the shop said it was within spec? I plan on getting 886's one day and I know I will be needing new UCA at that time. I don't have any rubbing issues even at full droop.

 

09 where are the pics of this 3" lift on your truck?

 

maybe they have incorporated more caster into their design for 09.

 

hey sonjay where did you get your springs and leaf packs?

 

I didn't have aftermarket UCAs on until about 20k miles into the lift -- tires weren't worn unevenly (to my naked eye at least).