Is there a "Tune" for 3rd gen that adds TORQUE below 2k rpm?

I'm a 2021 6mt driver, and low down grunt would be a boon getting up to the house.

I'm innocent regarding tune options. I'm sure I need a supercharger... or more displacement. ;-)

But if a tune will do, I'm all ears.

 

A tune will help - but not by much. You might gain 3-5 HP and about the same amount of torque, but virtually none of that will be available below 2000 RPM.

I would suggest you might be much better served by re-gearing your rear differential. This modification does not add power, but may serve you much better if you live in hilly areas.

Other here will know what gear ratio to suggest.

 

I think this is what you're looking for: https://www.tacomaworld.com/threads...-2wd-low-range-for-the-3rd-gen-tacoma.614743/

2-low and go

edit: assuming you have a 4x4

 

@VTCAL I'll eat the cost if the latest YotaWerx Tuning calibration doesn't put a smile on your face and a kick in your trucks backside. Just reach out at https://tidewatercustoms.com

 

Someone’s going to argue the numbers are not valid. Well, the torque is substantial enough to peg the butt dyno!

The BH2.1 is what you’re looking for. I remember being at this intersection this morning and feeling some good torque with relative ease. I copied and pasted the Latitude and Longitude coordinates from Fusion and sure enough, data don’t lie. First one in line and sure felt fine

Only 21% on the throttle input. I’m loving this tune all the way.

 

https://www.youtube.com/watch?v=dJPosyTSrPs

This cat cracked me up at the end!