What Have You Done To Your 3rd Gen Today?

The stage 2 is the way to go if you're looking at Eibach's. They ride muuuuch nicer than the stage 1 and nicer than untuned 2.5's. The only downside is they are known to contact the sway bar after install even with the relocation brackets. I installed a set for a customer a ways back and she really likes them, but we ended up removing the sway bar due to that issue. Eibach is aware of it but unsure if they have come up with a solution.

Thread here: Eibach PRO TRUCK Coilover 2.0 Stage 2 | Tacoma World

 

Will do but I'm sure plenty others can offer feedback like @drizzoh. I met another member who had them, it created an itch I needed to scratch and I found a used/never installed set for what I thought was a good price.

 

https://www.thesubboxshop.com/Toyota-Tacoma-Double-Cab-Subwoofer-Box-p/tacomadc16singleaa.htm

 

Yea it’s a little slick

 

New shoes for my Taco

Cooper Discoverer S/T Maxx 265/75R 16, stock Off Road suspension..... No plans to change that.

I have to figure out what pressure to run these E rated tires on the street when I'm not loaded down or pulling our travel trailer. The shop set them at 44lbs......I may drop them 10 lbs.

 

Emblem blackout finished.

 

Something like this
Is what I use

 

There is still glare from the chrome.



Happy Friday!

 

half installed 1" body lift before i found out i dont have a t55 for bed bolts. but more importantly it looks like everyone is right and front body mounts are trash on these trucks. 2023 with 6000 miles and theyre done for.

 

Wow I got 60k miles mine must look 10 times worse than yours. How easy is the switch, and did you shop around for any particular type of kit? Not sure i would want a full 1" lift, maybe less.

 

Gears came in from ECGS!

 

Finished up my “curtains”

 

I may be ordering my 5.29 soon. What ratio you go with?

 

Went to the shop to remove boxes from the rack so it can come off before body and paint. Still waiting for a bedside to materialize 6 weeks later. At least my truck has a friend...the tan one is in the same situation as mine.



I'm strongly considering goint to a flatbed at this point.

 

Ugh.
Are you going to go with the factory bumper or replace it w/a steel bumper? Also, will the body shop put your tailgate decal back on or does insurance not cover mods?

 

UPS dropped off a long box today from e-trailer. I have not opened it yet.

Inside is

Thule TracRac TracONE Truck Bed Ladder Rack -

A start on an "over Softopper bed rack" with quick removable rear section.

OH!

I used the tailgate on the taco to facilitate a woodworking project, refinishing a chest or drawers. The Taco was a workbench for setting up the oscillating sander. ;-) Sorry, no pics, It's a surprize for my wife!

 

Can I ask where you found these? Halloween 2024 isn't that far away.

https://www.tacomaworld.com/threads...3rd-gen-today.399305/page-13486#post-29259056

 

Went with 5.29s hopefully I can do the install next weekend

 

One vote for the flatbed

 

Haha. I think I got them at Home Depot. They were actually pumpkin yard lights similar to these below that I took apart, cut with my dremel tool, and attached to my ditch lights.

https://www.homedepot.com/p/15-in-Light-Up-Pumpkin-Yard-Stake-with-Timer-3-Pack-4313/317134127