What Have You Done To Your 4th Gen Today?

Corrected the shaking hood they should have done this from factory.
Found on Amazon
Automotive Door Weather Stripping 10Ft Car Door Rubber Edge Trim Seal Strip Gasket with Top Bulb Easy to Install for Car Bus Camper Boat RV Truck Doors and Home Applications

 

FYI, I chose to place the camera on the driver's side edge of the rear glass as I have the sliding back glass window that slides to cover the passenger side of the glass and I didn't want the camera in the center rear view area when looking in the rear view mirror. Also, be REALLY careful routing the cable down the A pillar. There's an airbag there so you have to disconnect the battery, remove the bolt at the top of the pillar trim and carefully pull the upper part of the trim off. At that point you'll see that you can route the cable on top of a couple of metal brackets that sit above the airbag. That keeps the cable from interfering with the airbag should it be deployed in an accident. From there you just carefully route the cable past the bottom of the trim panel to the left edge of the dash and then down to the rocker panel. The rest is easy.

 

What exactly was added and where? I cannot tell from pic…