installing bucket seats in regular cab

Im wanting to install buckets in my regular cab and I wanted to know if anyone has done this and what the process was like, and how much you spent.

All feed back appreciated.

 

someone on here put fj seats in his tacoma heres another thread to check out http://www.tacomaworld.com/forum/2nd-gen-tacomas/159053-reg-cab-buckets.html

 

i was going to do it but it seemed like too much work

 

First trick is to see whether your existing bench has side curtain air bags in it or not.

If not, the swap is simpler.

 

I took the panels off to install a set of components, didnt see an airbag. Im guessing it would be somewhere else though. How would I find out if I have them?

 

Are you talking in the seat or the overhead?

In the overhead there should be a little box (you can see the one on passenger side .... there is one for the front and back seat) just about even with your head telling you so. If it is the seat you are wondering about there should be a little tag stating so, shoulder high ... see picture (I know these are buckets but the bench should have the same tag).

 

you should be good you have an 08

my buckets:
http://www.tacomaworld.com/forum/2nd-gen-builds/17539-kelsons-reg-cab-18.html

airbag write up:
http://www.tacomaworld.com/forum/2nd-gen-builds/17539-kelsons-reg-cab-18.html