Looking for a 4" or 5" lift kit

I'm looking for a solid 4 or 5 inch lift for a 2nd generation tacoma. I would prefer that it be a full suspension lift, not a spacer or anything. I've been looking all over for a way to lift 4 or 5 inches..i don't know if they make a full lift kit thats a 4 or 5 inch, or if i have to get a few different things in order to make it work, I'm fairly new to this kind of stuff

 

http://www.tacomaworld.com/out.php?.../tacoma%2010-47405/specsheet/tacoma5spec.html

 

4x4 or prerunner?

 

the link didn't work, failed to open page it said

 

4x4

 

where can i buy that rcd system, i can't buy it off their site, how much are they?

 

Wheelers Offroad or Downsouth Motorsports sells them...i want to say around 1700-2000

 

thats expensive dude, cheapest i found it for was like 2100, anything a little cheaper?

 

There no inexpensive way to get over 3" of lift except for a body lift in combo with suspension.

 

you could get a clean 3" out of the OME kit for $699

 

yeah, how much could i do a body lift with a suspension lift for

 

Sorry about the link. What are you trying to do? How much do you want to spend? Did you read any of the stickies that are available that already lay all this out for you?

Start here -------->http://www.tacomaworld.com/forum/suspension/11282-tacoma-lift-faq-guide-read.html

 

i got the link to work, i wanna do a 5 inch lift, and the rdc is like 2100, but i could do a 3 inch suspension, and then like a 2 inch body, for around 1300?

 

Probably a little less than that but your safe at 1300. Your BL will be a special order from Roger Brown unless you want to make your own. I have no idea why you want a 5 inch lift but since this is your first post you may not have read through this site all that much. I suggest you spend a little time reading on here and other sites before taking the plunge into what you think you want right now. You may change your mind after you educate yourself a bit. It will save you time money and heartache down the road. At least make sure what you think you want is really what you want.

 

well i want something a little more then a 3 inch lift which from what i see is a pretty standard lift for a tacoma, and the 6 inch too much cause I'm only doing 33s, and I saw this guy, http://www.tacomaworld.com/forum/2nd-gen-builds/66059-solus694s-build.html , has a 4-5 inch lift but i don't how he's done it

 

Its in his post

Suspension
RCD 4"-5" drop bracket lift kit
- TRD Off-Road coils
- Bilstein extended length shocks (front and rear)
- 4" Block (ugh)
TSB Leaf pack
Light Racing Upper Control Arms

Well over $1300.00

Save your money and keep saving while you research. By the time you have spent as much time as you should reading (6 months +) you may have enough saved and have changed your mind on what you want. Just a suggestion. Don't be in a rush to get a lift on you will end up piecing together a frakenstein and wont be happy with it.

 

If you read down below the pictures he tells you what lift is on his truck.

 

Body lifts suck.

 

Wrong.