Elusive Elements grille GROUP BUY!!!

THANK YOU!!!
cape codder did a write up on how to relocate your horns and temp sensor if you have it
http://www.tacomaworld.com/forum/2n...atoshi-grill-horn-relocation-w-lots-pics.html

The Upper mesh is a bit more tuff
-cut the center bars out
-place the mesh in the shell and mark around each tab and the hole in the center
-cut as much out as you want the more you cut the less extra plastic you will see
- use the stainless hardware provided

see how much is trimed out


the lower is about the same
-put it in place
-get a right angle pick, scribe the mounting holes thru the hex mesh
-i used the same pick to poke thru the plastic for pilot holes the plastic is soft
-you can see the top holes from inside the bumper looking down drill them out
-then from the outside you can flex the lower hole locations up and drill them out from the outside

hope this helps a bit

 

Are these available for 1st gen?

 

I hope so

 

Just Got mine today! It looks amazing man. Cant wait to get it on. Thanks a bunch!

 

He actually has a mock up that he's selling for $150. I'm pretty sure I'm going to jump on it and get the production of this grill rolling. Taking one for the team lol.

 

let me know soon i have a few people looking at it

 

great make sure to post a few pics thanks

 

who has a mock up? u are talking about the grille for the 1st gen right?? because i would love one

 

http://www.tacomaworld.com/forum/1st-gen-tacoma-marketplace/177946-01-04-bdf-grille-prototype.html

 

oh, thats for the 01-04 models, i got a 99

 

What's your paypal?

 

ElusiveElements@hotmail.com

 

payment sent.

I put a note for a silver emblem!

Thanks

 

Got it on last night got a good picture of it this morning. Freaking sweet man!!

 

that looks badass.

 

thanks for the picture I really like the bolt together grills!!

 

No problem man. I have a feeling a few of my friend will want one. Ill be sending them ur way if they do for sure.

 

Ok, I posted this under lighting and meant to post it here:

Ok,

I got both the grills installed last night and the light bar. Have to raise lights to complete the job and I also had to relocate the horns which for some reason no longer work!!!!!!! For those of you that have not done this mod yet I would recommend a dremmel for the cutting out of the grill. At first I could not find mine so I was resorting to other methods (not going to say way to save face), but it did not go well...........................until I found my dremmel.

 

Got mine delivered today Tim.
Thank you very much. Very nice build quality. Now if the rain holds off for the weekend, I'll get them on.

 

Ok, I have one very minor complaint. What freakin size are you supposed to use for the hex wrench. I swear I have tried everyone I owned. My smallest one is just a little two small and the the next size up is to big.

Other than that they are great I will be posting some pictures tomorrow after the Hella Black Magics get installed behind the grill.