4 wheel lighted switch / Anytime fogs

50.00 to anyone willing to come over and do these 2 mods

 

You can do it. Here is the lighted switch, http://www.tacoma4x4.com/products. And the other is a wire and a connector.

 

You are about an hour and half from me. I have done both mods, but not sure if I could drive out there. PM me and maybe we could figure something out, but like Lazylegs said, it's easy. If you drove out here I'd do it for you for a beer or two or six

 

Case, let's figure it out

 

PM Shannon. He's the guy who makes the lighted circuit board that just screws in behind the 4x4 switch. Then all you have to do is slice and solder the power wire. Quick and easy, 30 minute job max and the parts are around $35.
http://www.tacomaworld.com/forum/lighting/68173-rcbs204-4x4-illuminated-switch.html

There a plenty of ways to make the fog lights come on any time. This is one of the simpliest, straight forward procedures. I think the LaCaribe style is the cleanest though but requires more work with the fuse panel.
http://www.tacomaworld.com/forum/technical-chat/4838-cheap-free-mods.html

More involved fog light anytime mod.
http://www.tacomaworld.com/forum/lighting/140035-fog-lights-la-caribe-style.html

 

How far are you from Shelton CT and how may beers do you want just for the lighted 4X4 switch.

 

You get the switch and I can put that in no problem. The method I have done for the fog lights is an add-a-fuse in the underhood fusebox that connects to the relay and the add-a-fuse taps into an existing fuse. Mine has been this way for 4 years with ZERO issues and that would be the route I would probably go as it's the simplest.

Again, switch is not an issue.

I think I have the wire and taps to tap into the illumination wires in the dash for the switch. My truck has this done so it could be used for reference lol.

PM me and we can figure it all out.

 

I have the 4x4 switch already

 

Well then that works .. one step ahead

 

wed/thur are good days for me