Woah! Another retrofitsource.com group buy! Lets get 25!

i believe he means the horizontal cutoff line of your projector.. make sure the line left to right is even with the ground... meaning left shouldnt be angled higher than the right and vice versa.

 

I'm in for a BI-XENON FX-R STAGE III KIT

What do I do now? Order? What?

Thanks guys

 

Group buy ended. Wait for the next one. keep an eye on the group buy section.

 

I'm on crownvic.net...wonder if these isnt interest there for these as well?

 

huh?

 

X2... Lol

Anywho... Got my morimoto's and bulbs. Can't wait to start saturday morning!

 

So I had a few too many... My cut off lines are way off. What cans I do?

 

I love the look but the cut off...

 

did you jb weld the thing in there?

what projector do you have? and how is it out of alignment i'm guessing rotational?

 

^ I got the fx-R's and are jb welded. I was just going to buy a pair of fx-r's(just projector) and redo another set of lights but before I buy I want to see if you guys recommend to try and cut between the projector and bowl to adjust and realign... Yes it's out of alignment.

 

can you show some shots of the output?? i wanna see the alignment

 

Bahaha! Here you go... the driver side won't adjust any lower, the passenger side won't adjust any higher and I've got that damn glare up top! everything was perfect before I tighten the bolts and jb welded.

 

pm'd

 

Sorry about your alignment, last time I did a set morimotos which were supereasy. Now I am doing a set of FX-R's. I have done some research and figure Iwill bolt them up and tighten the securing projector bolts then JB weld as thefinal step and/or do a couple of JB weld tacks like I did on my blazers till Iget the horizontal right. Not sure how I am going to tackle the retro for sureyet. But I am for sure going to take it slow being this is my first set ofFX-R's... Any thoughts or advice...

 

Thank you.

This is my 3rd set of FX-R's. The firs two came out perfect because i took my TIME. I got a bit Cocky with this set and decided to drink witch was a horrible idea. Just dont rush.

Here is an awesome thread that shows you how to.
http://www.tacomaworld.com/forum/2n...non-4300k-bulbs-gatling-shrouds-complete.html

 

Cool, thanks for the link. I was going to enjoy some whiskey and coke and do my retro but I might just hold back on the drinking and do the retro sober....

 

Def a good idea. A beer or Two with some dip is recomended to calm the nerves but Id stay away from car boms.

 

lol no problem i have extras for a reason dude

 

oh... my... gosh... been working on these for 8 hours now and finally have the projectors tacked in place with some quickset jb weld. holy crap what a pain haha!

it'll all be worth it in the end, but there were many moments where i really wanted to give up lol (of course i couldn't because this is my daily driver...)

i have a newfound respect for anyone who is competent at this!

 

Hey guy.. need some advice. Ive cracked open the headlights before, and when I did I cleaned the inside of the lense. It's had this residue or something ever since. Not a big deal as I've dealt with it for like 6 months now.. lol. But figured since Im takin them apart again, ill try and clean them again. What should I use? I used windex last time and it left streaks and residue. Mayhem distilled water? Just a microfiber cloth?

Thanks