Disable DRL's on a 2012 - it works!

Hey gang, I wanted to share this just in case anyone else wanted to get rid of their Daytime Running Lights. It was easy, all you need is two parts: a NON- DRL Denso 12.8v flasher, Toyota part # 81980-02030, and an M1 signal junction block, Toyota part # 82671-30360.

Follow the disassembly instructions from 007Tacoma's original thread, http://www.tacomaworld.com/forum/technical-chat/1475-05-drl-daytime-running-lights-install-oem.html , remove the fuse block, and you will just do things in reverse. Disconnect the Y-harness that comes from the large black DRL relay, and connect your NON-DRL flasher and Junction Block to the 2 ports that the Y-harness was attached to- you will find that they only fit one way.

On my 2012, there was a third small connector routed to the large black DRL relay, I think it comes from the E-brake switch. I reconnected that when I reassembled everything, and I also just left the black DRL relay where it was in case I ever want to switch back.

Everything works as it should! I got help for this from boomer6, thanks much, duder!

 

Where did you get the parts?

 

No disrespect, but why would you want to do this?

 

I kind of like my DRL's. too many idiots pull out,turn in front of you anymore.
Too each his own however!

 

Lots of people have had issues with melting lenses and fading rear reflectors. I did so I uninstalled mine.

 

Sorry Jay, I already sold the kit on here a while back.

 

lol at people, when you dont have it, you spend $$$ to get it. When you have it, you spend $$$ to get rid of it

 

Why the mods? Can't you just pull the bulbs out if you can't live with the lights?

 

the bulbs are also your turn signals

 

I see. Thanks. Given what I've seen (and you too most likely) in terms of MVA's, I'll keep mine working.

Too bad this is an issue though: they are there for a good reason.

 

I just want to be stealthy when I want to be

Also, I drive pretty chill, and scan ahead out of habit. I can always tell when some drone is going to pull out in front of me, and I adjust accordingly. I like being in control of my lights, not have the vehicle do the thinking for me.

 

RV7 where did you get the parts at? dealer?

 

Yep.

 

Isn't that what warranties are for?

 

Sure. And every experience you've had with the dealer has been smooth and positive, right? Haw. Who cares why? Because I want to is all that matters.

 

Unfortunately there's also deductibles to think about...I went by to get mine fixed (on the extended warranty at this point) and they said it's a $100 deductible to get it replaced. I have melted lenses but I'll just buy replacement bulbs and save myself the cash.

 

This... I like the looks of the one the 12's only!

 

My '09 Tacoma has both side melted lenses. I didn't notice the problem until 45k miles. Even thought I have extended warrentee, I was told that the headlight assemblies are not covered. This is crap, I have contacted all the Toyota customer areas, but no help. Does anyone know the GM part number to replace my turn signal/DRL bulbs?
thanks,

 

Hey There Paul ,

Just read your thread on DRL Disable. Don’t like amber DRL at all. Just want to confirm this DRL Disable Procedure will work on a 2012 Tacoma Access Cab SR5, 5 speed auto with DRL and Fog. Thanks, Scott,

 

Thanks for posting the thread for disabling daytime running lights on 2012 Tacoma. I did it and it works great!