LED turn signal recommendations

Currently I'm running a set of LED signals from Trail-Gear. I've been told by a few people that they are way too small and hard to see when activated. Anyone have any suggestions as to what I should replace them with?

 

Isn't there a mod to run the lights just to the outside of the headlights act as the turn signals? If not could you easily?

 

This.
I have mine mounted inside my corners along with the parking lights. I think I have pics in my gallery or my build thread I would post but im on my phone

 

On my 03 Tacoma, I used turn signals from a motorcycle when I added a plate bumper. If you wire the corner markers directly to the turn signals they will flash quickly. The motorcycle turn signals worked great as they were slightly flexible and I could mount them anywhere.

 

Yeah I converted my coner lights to turn signals.

 

Doesn't the corner light mod use standard bulbs? I was hoping to use LEDs.

 

I suggest "combining" the use of 1157 LED bulbs (and probably some resistors to eliminate hyper-blink) with Beau02's Fog Light Mod.

 

Cool, looks good. Thanks! I'm so used to hyper blink now, it doesn't bother me one bit.

 

http://www.tacomaworld.com/forum/1s...ix-hyper-blink-after-doing-fog-light-mod.html

Might help you out as well.

 

I have LED's in mine.

 

how would you wire in the resistors i just did this mod but cant figure out how to wire the resistors to eliminate the hyperblink