Muffler delete/exhaust removal

I'll try to find a link someone on here did it.

 

Just google search and here is what I found

http://www.tacomaworld.com/forum/technical-chat/34-dmh-exhaust-cutout.html

 

Sweet! Thanks guys! So for what I'm wanting to do ill need which one of the openers??

 

And I'd really prefer something I bolt on if possible and not cut anything?

 

^^ lol at this guy. u know everything about performance....
i wish i had ur knowledge lol
u dont know jack.
all u do is talk smack....


i got 3in QTP electric cut out on my downpipe for my turbo.
sounds awsome when its open and when u shut it my truck sounds near to stock...

OP. if u wanna see some vids let me know and ill upload some for ya.

 

It would be right after the y-pipe to catback flange. If their is enough material on the cutout, then you could cut out a piece of the exhaust for the cut-out to fit into, and use these:

http://www.summitracing.com/parts/SUM-692225/

One on either end. That way you can BOLT the exhaust back together. Cheaper than welding.

 

of course the turbo makes the exhaust a lil quieter.
Lol. ur a joke.
All I know u do alot of smack talking.
Where ur mod money at son? Or just broke? Lmao
Oh wait kuz u buy to much haterade. Lol

 

Exhaust sounds are subjective to the owner. Personally I dont care how my truck sounds as long as it meets its function.

 

Nor do you have be smart to be an ass. how about we cool it down eh?

 

I aint comparing. Just stating the truth.
Just keep drinking ur haterade.
Lol. U say a couple member on here waste money on our trucks.
How we wasting it? When were actually trying to get more companies/shops make more supporting performance mods for the 1gr. So everything isnt custom.

 

Would that work on a 1st gen?

 

Umm, check yourself. You're the one hating on whipper. Most of his comments are constructive(In this thread at least). I think YOU need to put down the haterade

 

......................................Back to the damn cutouts..............................................

 

check yourself? before u wreck yourself? lmao
lol. u havent seen his previous post in another thread.

 

And what does that have to do with this thread?

 

Could I use the cutout on my 02? If so I'd only need 1, right?

 

lol.than dont be putting peoples names in ur mouth.
lol so wat about ls motors.
im trying to get open a bigger market for the 1gr family.
theres lots of people wanting to do more with there 1gr motor. but there limited kuz of resources.
not everyone wants to mod a ls motor.

/end thread jack

 

yes u can use a cutout.
u can use it for any car/truck.

 

Incorrect. If you have an STS kit installed on your 4.0 Tacoma, without a muffler, it will not take long before you have a muffler installed. The turbo will marginally quiet down the exhaust, when it is at the end of the exhaust stream. It will however add to the exhaust "noise" with its own very high pitched spinning noise. That only gets louder at the rpms increase. Coupled with the "tone" of the exhaust.

Been there.


Now, as far as a cut-out goes, I would relate it to this, for the OP. First, just unbolt and pull off the catback exhaust. Drive around for a few weeks like that. It will give you a good idea of what the truck will sound like with a cut-out, before you actually buy anything.

I did it for about three months, with stock headers and stock Y-pipe. Surprisingly, it wasn't near as bad as I thought it would be. It actually sounded good, minus the extreme droning.