*Lets See Your Spindle Lifts*

A longer spindle is going to lift your truck ...

 

Anyone that is running 285/75/16's had to do this?

http://www.tacomaworld.com/forum/ba...n/192527-b-m-f-cmc-plates-cab-mount-chop.html

 

lookin good randy! Mount those lower headlight pieces though

 

Serious???

 

do you need new shocks for a spindle lift?

 

not necessarily

 

Camburg LT with Camburg LT spindle

 

so i can just buy spindles and brake lines?

 

yep

 

With stock rear:-/

 

I'm never actually sure if people realize this, so it warrants being said, but you can put your rear "lift" on prior(days/weeks) to putting on your front lift, and you're truck will barely look different, but when you put your front lift on first...you're effectively driving around looking retarded till you level things out?! BTW, love your wheels!

 

perfect!

 

What kinda hood is that?

 

McNeil fiberglass.

 

Yikes. Why does the corner stick up so high?

 

So if I will be running the All Pro 3" leaf pack, which 5100 rear shocks do I need to choose? The regular or the B110 series designed for trucks with 4-5" of lift on the back? I am assuming that I need the B110 but I just want to be sure before pulling the trigger.

Any help is appreciated.

 

Both sides stick up a little. I'm not sure except it sat in a garage for a year... im gonna weight the sides and leave it in the sun and see if it will conform... if not a set of flush locks will do the trick.

 

Will the fox 2.0 shock for tacoma will work with that setup?

 

taking it off would do the trick too...