GA Tacoma Owners BS Thread

Welcome to my headache world! I know alot of people will put small tapered blocks on their truck and get an all pro leaf pack.

 

I know man!! Or custom Alcan springs that are made for a 7 inch lift. But that probably some $$$. I could drop my plate and go to 884 coils and it would maybe drop me down to 2inchs in the front. Dang it man I need to stop before this gets me spending money again! Because a 6 inch lift sounds good right now with those matrix spindles if I could get all the stuff right!

 

Where do you buy custom Dakars for a 7" lift ?

 

My bad not Dakars. I meant ALCAN. I know the guys with 6" DB lifts use them. I am sorry about that I got them mixed up with Dakar but I meant custom Alcan. They make 6" springs figure they could do 7" edited that post and fixed

 

No worries brother just thought I hadn't seen them yet

 

It would be great if they did.

 

http://www.tacomaworld.com/forum/suspension/203889-maxtrac-spindle-lift-2nd-gen-prerunners.html

This may help you! I need help figuring mine out to lol so I can plan a new lift when I get new tires and rims

 

Originally Posted by george2pak
So... The spindles will NOT go together with my OME Suspension lift kit and a after market UCA?

You can combine an OME kit with lift spindles for a total lift of between 6-7 inches, however an aftermarket UCA will be required in order to properly align the truck.

Found this for ya Costa

 

That's the lift I have. And I want maxtrac spindles also just got to figure out how to level. And I found that you posted in that thread already my bad I just saw the orginal post had how he set his shocks

 

If you are going to add that much lift you are going to need longer shocks and countless other things will have to be tweaked/cut to make that work.

 

The spindles want change anything with the shocks. You can use them with stock suspension.

 

Brain fart. But the rear end will need some attention fo sho.

 

Alright guys this may be my last question. The Dakar leaf springs ( ARB CSo47R Old Man Emu/ Dakar Leaf Spring) how its listen on Amazon, seem to be perfect for what i'm wanting to do with the rear of my truck but i'm seeing that its for four wheel drive only? Can I not use them on my 2wd prerunner? Once again its prolly an idiot question.

 

Will it work? Yes. Recommended? No. 886 is not recommended because bilstein was not designed to dampen it. 886s (#660) are stiffer than 884s/885s (#590).

 

More snow. Not much, but the ground is covered. Nothin on the roads though

 

Okay thanks. My truck sits fine as is I was just seeing if there was a cheap solution to all the weight I added up front. I will just save my pennies till I can get a new coil-over setup. Which will have to be a lot of pennies.

 

OR you can save A LOT of pennies by donating that front bumper of yours to this guy

 

Tempting!....but no.

 

i have Daks on my rig if u remember what it looks like.... awesome ride and lifts higher than just shocks. Im at 4 inches with a full OME rig: shocks are 9000 nitrocharger sport, 885x coils and Daks. And Im 2wd

 

I remember the front of your truck not the back, go figure. Did you have to buy that fitting kit too? I'm not exactly sure what it does and it's optional. How much lift did you get from them?