ABS coming on after 3" lift

Has anyone had this problem? I installed a 3" lift on my 2010 tacoma and put new tires on it and got it aligned and also installed the 3" differential drop. Now when I go around corners somewhat fast the ABS starts kicking on. I don't like the ABS in the snow and mud anyways so was planning to put a toggle on it but now i feel like I should just turn it off full time. Anybody else experience this?

 

Disconnect battery for 10 minutes, drive around 10 miles, if it's still on disconnect for 10 more minutes and repeat until it's off.

 

It's not ABS it's VSC / Traction control

 

Same procedure, after installing lifts 3 times the ABS/TRAC/VSC lights all illuminate and I disconnect the battery and it usually solves the problem.

 

But yes going around a corner quickly with a lift makes the VSC kick in

 

You can have the skid control ecu recalibrated using the method shown in the pdf in the first post of this thread

http://www.tacomaworld.com/forum/suspension/41215-lift-vsc-answer.html

That may or may not work

FWIW , I turn VSC off everytime I start the truck

 

You must be trying to drift around corners.

 

Not true

 

Idk, I have tried to make the VSC kick in (on a private road I mind you) and couldn't get it to with any lift.. Idk if there is a difference between 2011 and prior years VSC system though

 

It happens , trust me

If it didn't happen for you congrats

 

I'm ain't callins you a liar Mr. Oz, there are plenty of threads to support your statement.

 

My post might have come off wrong , I meant you are fortunate that you don't have to deal with it

 

From all the reading it just sounds like a PITA to deal with, and dangerous..

 

It's called a zero point cal and it should fix your issues ...I don't think we charge to do it at the dealer

 

I was kidding!

 

Too bad it doesn't always work

 

Thanks guys, I thought I was going crazy. Not trying to drift around corners or anything crazy. I live in the mountains and bought this truck a little over a year ago and have been driving it up and down the mountain for that time with no issues. I really don't like the ABS in the snow though it is for people that don't know how to drive in the snow haha. Anyways put the lift on this last weekend I will get around doing a write up on it because I scoured this site for what I wanted to do to my truck. But today when I went down the mountain for the first time with the new lift either the VSC kicked in or the ABS going my normal rate of speed I always do. Felt like the tire was rubbing somethin bad. But I stopped and got out and there was no rubbing at all. So I started to test it and I finally heard the beeping sound in the cab.

 

I will try disconnecting the battery first. If that doesn't work I will take it to the dealership for the zero point calibration you say Tim Allan?

 

The zero point calibration is in the link I posted

 

That's what it's called, I would print the PDF file out, sometimes the dealer likes to play dumb.