New England B.S. Thread

I'll take it, alex u can have mine from my grille

 

im trying, you fuckers dont wanna go this weekend. im on the waiting list for ENH, but all those rednecks probably wont give up a spot.

 

I'm not a redneck.
If your the only one on the waiting list,hopefully they let you go.
And someone usually always cancels.

 

Let me see a pic and it's sold

 

Honestly, I don't have any experience with KC (I'm running all PIAA) but damn those are some high output! I think mine are 55W each, those 100 and 130W lamps are going to be bright but also have some serious draw.

Check out this guy for 100W lights:
http://www.tacomaworld.com/forum/group-buys/273495-may-giveaway-automatcentral-com.html
He's a vendor here so you should be able to find reviews on his products. Here's his website:
http://www.automatcentral.com/tacoma-trucks.html

Wiring the lights like I have mine isn't terribly difficult. All you basically do is wire the switch twice. If you want to go that route, I can post up my wiring diagram for you to use.

Same here. I'm not an electrician but I've basically rewired my whole house. Obviously, the code in RI will be different than MA, but if it's just a procedural question, for the most part I do know what I'm doing when it comes to wiring.

You say redneck like it's a bad thing

I absolutely have redneck tendencies

 

It's 4'x4' so more then enough to do 2 grills .

 

I'll end up not using it and buying a grille like you did too lazy

 

I didn't buy a grill

 

Procured?

 

How'd you find my yearbook picture?

 

See, you are getting senile, that was last weekend!

 

How much were the grills?

 

Hey y'all, new Tacoma guy, just moved back to NH/Boston from the Central Valley of California. Now that I don't have to pay sales tax, here's what I just got for lifting my '12 DCSB TRD Sport. Thoughts? Am I missing anything?

Tires- General Grabber AT2 265/65/R17 on OEM Sport alloys
Exhaust- TRD Catback
Intake- aFe Dry Air Filter
Suspension- Bilstein 5100s, OME 885s, Toytec 1/4" front trim spacer, Light Racing UCA's, Icon 3 Leaf Progressive AAL (leaving factory overload installed)
Armor- 3/16" steel Relentless skids (full set, approx. 135lbs., also to deter from catalytic converter theft)
Bumpers- OEM

Thanks!!!

Drew

 

worked for it lmao

 

Who makes a gas tank skid that i don't have to have the TRD package to install it?

 

Ill let you know how the quality of the mesh is. Im skeptical, i have the grillcraft mx mesh right now, its awesome, definetly high quality. Im going from the deep lip satoshi to a thin lip. Im hoping my paint job comes out better this time. My problem was i was rushing last time, because i was driving my truck around with no grill. This time i will have a spare grill and better quality paint. I might do some bends in the mesh and do my own version of the raptor style grill,
Only 3/4" deep bends probably. And im thinking 1 1/4" deep lip at the deepest point.

 

You should look into getting the TRD straps for your tank.

 

I didnt even think of asking you about them, sorry it was $40 and $9 for shipping. Its a aftermarket replica. I think they are the same ones homertaco uses.

 

I'll take half of the sheet John