What have you done to your Tacoma today? 1st Gen Edition

holy piss haha that sucks haha

 

No programming.

Insert key in ignition, push green button on alarm brain (next to fob in picture), hold for 3 seconds, alarm light turns on, press lock on new fob and it's programmed. Turn off the ignition and then you've got a new fob.

Took maybe... 1 minute to do.

 

Any more info on this remote? I kinda want to pick one up now...lol

 

Trust me it works, there is nothing wrong with the fob, its the antenna thats run up under the dash and hidden by all kinds of shielding metal and electronics. Cut the tape on all the wires and find the grey wire with black stripe.Very last wire in the corner of the plug. It runs up the wad of wires about a foot and just ends. Pull the A-pillar and you can run a hanger or fish tape down it in the corner of the dash right to the wiring harness. Splice on 4ft of wire and pull up through the corner. Theres wires already running up the A-pillar so i just wrapped the new wire around those and stuffed the last bit up under the head liner.

 

Does this work for any alarm system?

 

http://www.ebay.com/itm/120730235486?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Check the FCC on the back of your remote. I put that in ebay and it came up with this one but double check yours.

Lol. I did that. Old remote doesn't unlock inside my house. New one does. No problems.

For $15, skip coffee for a few days and try a new one. It's worth it. Just my .02.

I have no idea.

I don't know whether aftermarket "brains" have a programming button or not.

I know it works with the stock one no problem.

 

I did the same thing and it only gave me about 5-10 extra feet. Doesn't work for everybody evidently

 

hey could someone help me out and send me a link to someone doing the deck plate mod on a V6. I have been searching and searching and all i can find is people who have done them to the 2.4 and 2.7L. I have a few questions about the mod itself. What diameter deck plate will I need for my V-6 air box? and do I have to remove the EFI fuse?

 

The Yota is throwin out some bass now!

The old system:

MTX 10" w/ Audiobahn A4004T amp

The NEW system:

Rockford Fosgate P3-12" w/ Kenwood 1000w amp
(Note: I need larger amp to power this P3 beast to its full potential)

 

Kitchen called! They want their microwave back

 

1400 for the ADD.......damn this shit!!! Seems ridiculous

 

Ha ha! It IS quite large! But the sound is well worth the space lost back there! The 10" didn't put out even half what this 12" does!

 

Haha definitely, it was a pretty big difference in my buddies Tacoma too

 

About to upgrade to a 8" W7 here soon

 

Is your sub taking up the back seat? i want to put a sub in mine but I kinda need all the room, i was trying to find a way to put the sub between the seats but havnt came up with a good idea yet

 

Nice! I hear those things put out quite the rumble as well! Especially for an 8" sub... they sound like a 15"!!!

 

For the people that want more than 25 feet of range, I did a 2 way alarm with remote start and can see what my truck is up to on an LCD screen that vibrates when I lock/unlock, I can start it from a quarter mile away, I can see how warm the inside of my truck is, and I can scare all the neighbors whenever I want. Plus a bunch of other features I didn't need.

 

just the wrong 10'' is all..

best sounding subs money can buy are 8'' subs.

 

I've got a pioneer 10 back there now and yeah it does the 8 will take up just as much room cause it'll be a ported box

 

from camping last week.