New England B.S. Thread

Nope. Each of them are base elements. Neither is a component of the other.

Mike

 

Indeed but ebay is your friend. Also I needed it to go with the agressive street fighter look.
http://www.rideicon.com/products/?productGroupId=66620
With the silver mirror shield

 

Oh give it a break. You never drank when you were un-responsible teenager were you lol

 

I guess this what happens when you side step 419hp with a 4 banger drive shaft on pavement, welding it later

 

Does anyone know what size thread the cv joint main nut is. Mine was shitty when I removed it during the lift install and when I do the bushing I will have to remove it again

 

I love the Variant helmet

I tried one on and it unfortunately didn't fit me real well. My favorite helmet so far has been my older KBC. My current helmet is an Xpeed helmet and it's one where the whole front flips up so you can actually talk to someone at a light. Also got that goofy built in sun visor. Never thought I'd like that feature but it's been great!

 

The truck is going to be a tank this year in the winter (if we actually get snow). I'm supposed to pick up a set of 4 studded snow tires on steel wheels this Saturday

 

Should be in here.
http://www.tacomaworld.com/forum/2n...axle-replace-front-wheel-bearing-2nd-gen.html

 

I don't know but I have a spare axle and nut . I just don't think I have a tap that big . But I might . Ill post later when I get home from work .

 

Thanks David I will check it out

Me neither but I think the elevator company may need one very soon

 

Lol worst case I can bring it into work . We should have the right size .

 

That would be great. I am getting all my shit together to do the bushing so no big rush

 

Um-NO.

Good luck welding that, looks like it's cast. Warm it up real good before you weld it.

 

I got free tickets at fenway for being military Tuesday night, had a great time. And the orioles won

 

I have a set off 35x12.5-15 Interco thornbirds and Wrangler RT2's on 16.5's also trying to think if i want a plow or not. It's not too good on gas I had it backed up to the garage with roomies civic in the garage let out a 5500 rpm rev and the car was covered in yes raw gas. I cant stand behind the thing for more then 15 seconds hyros up the ass. I messed up the sun machine at my buddies shop before the filter clogged it was 2970ppm

 

I can't imagine those interco tires would be much good on the road though. They're deep lugged but unsiped, right? They'll be great off road in deep snow but shit on pavement covered with a couple inches of snow.

I'm going back to 245's, winter tire and studded. It'll look goofy but should handle great!

 

this is the second shaft i broke this week and the only one I can fix. The aluminum one is a little different story the side step was female induced

 

They be sipped roomed has a grooving gun with sipping tip, You do NOT want to know whats going to be covering my trans for a skid plate well I'll give you a hint they are 2" thick round and cast iron and weight about 120lbs. I want to drive this truck head on into a snow bank and just lay the hammer down in 4 low and see what happens. Lots of noise ?

 

I've always wanted to find a way to mount steel weights down on the frame instead of in the bed. Love it

 

Man hole covers roomates dad works at DPW has quite a few