Need help with my tacoma

I have a set of 3157 leds that i want to use as my daytime running lights but every time I put them in it blow my tail light fuse ive tryed reading up in it but have gotten no were just want a straight answer no links or anything for other lights

 

too much draw or bad wiring/ground?

those are only the first things that come to mind

 

Ya that was my first thought just wondering if resistors will fix the fuse problem or just deal with the hyper flash

 

3157 LED's aren't wired correctly for the turn signal housings and therefore will cause a short. Start at post #135
http://www.tacomaworld.com/forum/1st-gen-tacomas/77781-fog-light-mod-7.html

Same issue, blew the turn signal housing.

 

Ah....you have a newer model. Maybe the CK wiring still applies.

 

Its a 2013 tacoma

 

as Rubio said, not sure if they still have the CK version of the 3157 in newer models but if they do then it could be the problem.

http://www.distantxtremes.com/1/post/2012/07/3157-vs-3157ck-what-is-the-difference.html

it all has to do with where the ground is

 

You need type CK LEDs. Contact SUPERBRIGHTLEDS.COM.

 

No the resistors are only for the hyper flash...
You got the ck style bulbs right? I'm the one who tested to make sure they where that style bulbs for the tacomas when ambiguous did the group buy...

 

Thanks i got it to work all i did was put 2 or the 4 wires on the same side or there are 2 positive and 2 negative and it worked like a charm thanks for the help