Cheap/Free Mods

I bought my Stalk...stock, wichever one is right. Pick it up tomorrow. Funny thing is , its 108 degrees here... in PORTLAND OREGON!!! Stealership wouldnt give me an off season dicount ROFL.
(why can't i find that degree circle, thought the keyboards had one??)

 

Hold down the Alt button and press 0176 on the 10-key number pad (not the overhead nummerals) and release alt button.

108°

Thats old school stuff when a mouse didn't exist. Well it did, but a mouse was only a mouse.

Edit: Did I just date Myself?...

 

I'm running a laptop w/o the k.pad. I've never cut n pasted either lol . BUT ANYWAY.... dungondidit! I have the wiper mod, works fine zero problems mod related.Thanks Roland for the write up! 107.4 degrees now.

 

Tiger, I created a thread for the replacement of the PopNLock lock here:
http://www.tacomaworld.com/forum/technical-chat/46392-popnlock-lock-replacement.html#post808284

Didn't know if I was supposed to put it here or not but my instructions were pretty long so I made it in it's own thread.

 

Nice! Too bad I tossed my lock in the trash after it seized up after 1 winter.

 

Well now there's a replacement.

 

hey, just wondering if you know if the seatbelt chime off mod will work on a 2006 Tacoma?

 

No, only newer models.

 

I Did the cruise crontrol mod today, went good except the clutch part.I thought my hands were small enough but they were a little cramped in there. 2008 reg cab 4wd 4cyl cali made no problems, my hands are my problem lol. Whoever took the leap of faith and started this mod, a Job/mod well done, Thank you! Who ever mhadden is on toyo nation and piercedtiger here for linking us to the modThanks.

 

Did u ever find out about the blue LED mod??


Blue Dash



White Dash
[/quote]

 

Added Chris4x4's writeup/videography of washing and reusing the cabin air filter to the TOC.

http://www.tacomaworld.com/forum/te...in-filters-can-they-washed-answer-inside.html

 

Just did this to my 09....Worked like a charm!!! Thanks bud!

 

I got a bit confused and probably did the same thing you did at first. I made a slight change to the original post that may help you...

1) Turn the Car 'ON', but do not start the engine (Leave your foot off the brake). Cycle your trip reset knob until it reads ODO. Turn the ignition back off. Wait a couple of seconds.
2) Make sure seat belt is not fastened
3) Turn the ignition back on, do not start the car (Leave you foot off the break) As soon as you see everything light up, press and hold the trip reset knob (with the display on ODO) and do a long 12 second count.
4) After about 12 seconds and with the trip reset knob still depressed - Fasten your seat belt, as soon as you fasten your seat belt, you should see the ODO display go from XXXX miles to "b-on". At that time release the trip reset knob and then press it again. It should cycle to "b-off". You should be all set and turn the ignition off and unfasten your seat belt.

 

thanks so much for this man, i would have never guessed there was a code to turn that aggravating thing off my gf hates it lol thanks again

 

well i thought i would post my placement of my aux fuse block i made my mount out of alum i had laying around the block i used has 12 slots for what i will be doing over time if u don't have alum then steel or wood or even duck tape could work lol hope some one finds a use like this for there truck hope ya like

 

Does this also take care of the passenger seat seatbelt warning chime?

TIA

 

I did the buzz off on my '09, my observations:
It chimes once when you start the vehicle. It never chimes any more for either seat while the vehicle is running.
This only effects the chime. The seat belt warning symbols still flash.
Sometimes I put an item of weight on the passenger seat and the symbol flashes away, of course.

 

Many Thanks

 

yea man no problem it ran me about 50 bucks or so to do thing plus i had aces to the weder ant work so it came out nice how your instal gose wll