Rigid Industries SR-Q Back Up Light Kit Install

Great write up!

 

Thank you bro

 

My flush mount sr-q backup kit should be here tomorrow. Excited to get them put in. I need to figure out how to wire them to a switch in the cab and to the backup light power so they come on every time with the factory lights but I can also turn them on with a switch. Any ideas?? Going to use a OTRATTW switch inside.

I know I can get power from the trailer lighting plug or backup light wires for the sr-qs to come on with the backup lights. Just need to know how to also wire it to a switch and what switch I need.

Any ideas?

 

Yeah. Read the writeup lol

 

Sorry for the late response. Look at taco daddy write up. It's really good!

 

Thanks man!

 

after getting my backup kit the rigid harness is extremely easy to follow... my previous question now seems very dumb haha. im going to try to use a OTRATTW SPDT on/off/on switch with separate indicator lights.. that way i can have it in the 'on when in reverse' position all the time without the switch indicator light being on... and the switch indicator light will still illuminate when the rigid backup lights are on without the factory back up's.

will use this switch to match the switch for my LED light bar.

http://www.otrattw.com/proddetail.php?prod=VVPZC77-54R

with the V6D2UHCB rocker switch on/off/on red/green indicator LEDs

install to the right of this OTRATTW switch. Hopefully this works as planned haha.

 

Love their switches, some of them crack me up.

 

Got my flush mount sr-q's put in today. The wiring was extremely easy and the lights are incredible. At least 1000x brighter then factory backup lights.



Factory backups.


Rigid only


Not the best spot to show how bright they are but trust me they are BRIGHT


Thanks for the write up OP. For sure pushed me over the edge to order the kit.

 

Nice install! Thanks for sharing the before/after shots.

 

Great Write Up!! Very Helpful!!

 

Thanks brotha!

 

A big Thanks again to TacoDaddy on this install write-up. I followed everything and just installed the same Rigid lights.
I wanted to note that for the newer Tacomas (I have a 2015), the reverse signal wire is different. It is here, as shown in this post http://www.tacomaworld.com/forum/2nd-gen-tacomas/204199-2012-reverse-camera-switch-2.html for who ever needs it.

Great write-up!

 

Doing this soon!

 

Thank you for the compliments & link! Merry Christmas!

Thank you! Merry Christmas!

 

very glad this got bumped back up, gonna use this to install my rigids once my pelfrey rear is done. Well done TacoDaddy

 

Great thread by TacoDaddy, good to see it bumped up. Merry Christmas everyone.

We will run an after christmas special on Rigid because there are only a few days left on their 2014 rebate and we dont want anyone to miss out.

 

Thanks brudda! Merry Christmas!

Thanks again man! Anyone reading this thread and is interested in picking up Rigid Lighting or other accessories/parts for our trucks, hit up TAP Auto Parts. Chas is the man and you'll get some great stuff at a great price. Merry Christmas bro!

 

Doing this mod sometime before the weekend! This thread is gonna help I can tell! Thank you!

 

Post up pics and/or results!!