Steering components??

Ok my front end needs some help fast! just found a passenger inner CV boot is ripped so I guess after a OME lift and 150,000 miles I've got leaky LBJ's outer tie rods and I believe a loose driver inner tie rod(popping when turning wheel and holding the rack boot...long arms) Also got the vibs from 35-40 so quess i gotta do the needle barring also while I've got it all torn apart.
So I need parts and found "Low Range Off road" has all the parts at a good price! so any one try their ball joints/tie rods compared to OEM??

Need:
Inner/outer tie rods
LBJ's
Rebuild CV's with new boots
Driver side needle barring

So thoughts on where to order parts, Low range, rockauto,camelback? sorry for beating the horse I'm sure I am.

Thanks

 

you can get the CV axles from http://www.cvjreman.com/
get anything Ball joint related from camel back. I would get the tie rods from there as well but thats just me.

 

Thought I read somewhere that there is a replacement bearing that is superior to the needle bearings. Tried to find writeup for you but failed. Hopefully someone else will chime on this.

 

http://www.tacomaworld.com/forum/1s...1st-gen-4x4-front-diff-bearing-vibration.html
Might check this out.