What Have You Done To Your 2nd Gen Tacoma Today?

Debadged and Painted Front Emblem Black

 

Anyone point me in the right direction for the fog any time mod for 2013 Tacoma prerunner. I've looked but the methods used would work for mine

 

Toyota care finally ran out so today was the first maintenance that I've performed on my Tacoma. I decided to tackle most of the 30k maintenance today. Changed the oil with Mobile 1 & a stock oil filter, changed the air filter for a new oem one, changed the spark plugs for some new Denso plugs (the front driver's side was a big PIA). Next week I'll be changing the fluids in the front/rear diffs & the transfer case, as well as a tire rotation.

 

I finally got around to installing my wiring harness for my new Curt Hitch. It was T-Connector kit #55513 and was easy as pie.
Take off rear lights, plug in connector, route wire to passenger side, plug in connector, back to drivers side, double face tape black box to inside light housing, attach ground wire to available bolt inside housing, secure wires by zip tie, reinstall tails.
Done.

 

Question - Does anyone have a link or know how to remove the sunvisors? I am tall and would like the extra inch of vision space so wanted to remove them but not experienced with electronic wiring.

 

Some broad backed into me in the parking lot. Never been so angry

 

All you have to do is unscrew the pivoting end and pull that end free of the roof. The electrical connection for the mirror light is built into the housing and disconnects when you pull the visor free.

 

Dude that sucks!

 

Sucks but as long as you have her ins info you can get it fixed.

 

Really slow impact. No idea how she didn't see me in the rearview mirror. I was sitting there for 2 min. Looks like fender and passenger door repair

 

Put some more miles on her today. Got a chance to meet up with River Rat 69 to drop off some stuff he got from me. It's pretty cool to meet up with people that are on here, always nice to put a face to a screen name. LOL. I saw some of the Satoshi type grills he does too. Make me want to change mine out in the near future.

 

Thank You!!! That was way easier than I anticipated

 

you've been to the future.

 

Fixed.lol

 

This is what is used for my '10

 

Fuses are setup different in the newer years. If it can be done idk.lol I'll take a look

 

Could you lift those relays up and snap a pic of what blades you connected

 

This is what I used for my 2014 DCSB...don't know why it wouldn't work for a 2013 PreRunnner.

 

The method you used


What my fuse panel looks like
I'm missing the relay that method taps in to