What Have You Done To Your 2nd Gen Tacoma Today?

Installed the taillights































​

 

I absolutely love the white tail light mod!

 

Its look real nice

 

Thanks brother! Red would look great on yours if you are able to match the paint.


*EDIT* Not the original red of the taillights. I know someone would chime in and say "but your taillights are already red" lol.

 

You could make that a small side job

 

Thank you

Haha... Thanks but no. I'll be more than happy to help someone out but It's pretty much a couple day project if done correctly.

 

After doing this to my headlights....this ^^^^^^^^ is what I wanted to do next. Looks great



DO THIS

 

RearViewMirror: tail lights look pretty awesome. the areas you painted, where they just black/chrome before? I just looked at mine and all those areas are red reflector type material.

 

I finally added a 110v outlet in the back of the center console. Used a plug and wire harness from a 2011 f150. It has a green led on indicator but I didn't wire that. Also did the 400watt always mod and in the process blew my starter fuse but I had a spare. I'm happy how it turned out next is a 12v plug back there

 

Yeah boy! This is what i'm talking about. I don't like the outlets that everyone here is using, but I have one of these on order (thanks for the part numbers, btw)

I'm going to wire the LED, though. If its there, it's meant to light up May have to wire it all the way up to the inverter switch, unless there is an easier way to do it.

 

Do 5%. With the factory tint already on and adding that it's legit.

 

You should do a write up on how you tapped into the factory converter... if thats what you did at least

 

Its already been done that's how I did it

 

And here is my new tint job

 

Not sure why it only loaded one pic

 

Dude your headlight's look awesome! Might just have to go that route to finish out the all white. Going to paint the bumper this weekend so I can get rid of this shitty chrome.

I taped off the area around the led lights in the middle and the reverse light area. Everything else got painted. If you do it you can either tape off the red reflectors to keep it legal or paint over them like I did. Do not try to pry them off because they are glued in place and you will most likely break them when trying to remove them. Plus it makes it a little more uniform if you leave them rather than take them off.

Hope this helps.

 

Install new front emblem.

 

You can send that to me for fweee

 

Did the rear bed storage box lock mod http://www.tacomaworld.com/forum/2nd-gen-tacomas/100361-bed-storage-locks-full-diy-write-up.html

 

What and where did you get the dbl usb chargers from. I need some of those.