cheapest bolt on sliders

hey guys, i just recently picked up a 2010 access cab, and i was wondering if any of you can reccomend a company that makes some cheap bolt on sliders.
i would get some weld on sliders, but i dont know of anybody that welds around my area, and i like the convenience of bolt ons.
the only company that i know of is demello, but theyre pretty pricey. thanks

 

Just fyi exhaust shops will weld them on for like 60 bucks

 

Given that you are on a budget, you may wanna consider some weld-ons as bolt-ons are often more expensive. Like he ^^^ said, you can get any exhaust shop to do it for a small bit of cash. If you decide to go weld on, some of the cheapest yet quality sliders I have found (in my research) are by 4xInnovations. Im ordering some tomorrow

 

the thing about getting bolt on sliders is that im scared it might do something to the warranty of my truck, and it would be hard to take it off when i go to try and resell the truck

 

Same thing I though about with mine. But weld on are stronger, cheaper, and you can grind them off and flatten it out and paint it black and you would could hardly tell.

 

http://www.demello-offroad.com/catalog/product_info.php?cPath=27_21&products_id=87

X3 on going for the weld on. they are cheaper and are gonna give you a better piece of mind when you end up using them. check out demello-offroad. they make great products and are located in corona, you could save alot on shipping costs by driving to their store and picking them up...just a thought.

 

I can send you a weld on kit w/o the 4 month wait & w/o going bankrupt. Bolt on's will be out soon. They are 1-3/4" and make the Demello's look undersized.

http://www.tacomaworld.com/forum/buy-sell-trade/50679-tubed-sliders.html

 

yeah, those look way better than the demello's. good work. got any for the 1st gen tacomas?

sorry for the thread jack heffer...

EDIT: nevermind, just read whole post...got any pics?

 

All weld on kits to my knowledge come with the legs and frame plates loose, then the welder who installs them is the one who has to get the clearances correct. It would be worth it for this guy to take the trip from L.A. to me to have these installed if he really doesn't have anyone up there to do it. I can make this style slider any length someone would want. I'm right down the I-5 in Oceanside.

 

stubbs come with plate son

they are really strong (and quite heavy because of that)

mine had 5 legs (mroe than any other brand) and ends are not only capped but doubled with another tube inserted in... try to find at elsewhere

www.stubbswelding.com

 

Beefed Taco i just sent you a pm.
im definitely interested in your sliders

 

How much would you charge to weld my sliders on if I drive out there?