What Have You Done To Your 2nd Gen Tacoma Today?

last thing I will leave you with is this. IF you are going to put your relays in the engine bay. Get the weatherproof relays and harness. DO not use the ones they give you. You will have to cut the harness up anyways to make it work in the config you want. Just do it the right way from the start.

$19 HELLA 007794301 12V 5 Pin, Mini ISO Relay with Weatherproof Cover

http://www.amazon.com/HELLA-0077943...d=1419872059&sr=8-1&keywords=waterproof+relay

$21 HELLA H84709001 Pig-Tail Wire Harness for Mini ISO Weatherproof Relays

http://www.amazon.com/HELLA-H847090...onnector/dp/B000VU9D0C/ref=pd_bxgy_auto_img_y

 

Thanks man ill do that. i thnk what im gng to do is run two relays one to convert the negative switch to positve then run that positive into the harness that comes with the kit(which is weatherproof) so i dnt have to modify the harness that comes with the bar and so i have power for my lighted override switch that is in the cab. does that sound like a decent set up or is that a mess waitin to happen?

 

nope. tjhat will work too. just mind the rats nest of wires.

 

Thanks alot for the help.

 

I removed all the badges and TRD sticker. Plasti dipped the front Toyota emblem. Now just waiting for my black wheels and Nitto tires to come in to finish the no chrome / shinny look.

 

I just called him to hopefully get one. Will it hold a 34?

 

Thank you brother!

 

Played In The snow

 

I wish we got snow like that around here. This is all we usually get --->

I just drove my truck in the rain today...boring.

 

Ya I'm hoping for more it dumped a bunch a couple days ago

 

Plasti Dipped the front grille and emblem and relocated the horns, waiting for my BAMF mount to come in.

 

Where did you put your horns?

 

Used the radiator support to mount the horns and the temp sensor. There are already holes there. You will need some hardware to mount the horns again. But there is a slot that the temp sensor will fit into perfectly. I will say, it was a bit of a PITA haha. Its pretty stright forward, just a bit time consuming if you've never done it before.


I used this method
http://www.tacomaworld.com/forum/2n...atoshi-grill-horn-relocation-w-lots-pics.html

 

Drove mine 150 mile on 37k used big fails in a blizzard in the dark at 3am. Only used 4wd high for about 20 miles.

 

You've got balls my friend, although depends how cold it was and how much snow was on the road

 

Installed Sylvania led license plate bulbs, Philips gy6.35 35 watt reverse light bulbs, and painted my badges satin black. That's fresh paint right there.

 

I threw an Innovated 55w HID conversion kit in today. Unfortunately one of the lights is slightly bluer and flickers when turning on, so I'm getting a replacement ballast.

On the bright side (pun intended) they really light up the road. Further the bulbs are shrouded on the bottom and so they can be used in stock housing with blinding others (just have to make sure to aim headlights properly).

Anyway, I was pretty excited. I'll post pictures once I get the new ballast in!

 

Picked up a slightly used (less than 1 year old) TRD cat back exhaust off of Craigslist for 200$. Super pumped over this deal.

 

Great pic!

 

X 100000000000000000000

Love that pic tyfighter! Can't wait to get some snow around here.