Center Console Light replacement (automatic transmission)

I have a 2011 Tacoma, the center console light has been flickering, I can't tell id the bulb is going or if there is a short. The dealer wanted 99 dollars to replace the bulb. I ask for them to just leave the bulb in the truck and I would do it myself.
I have a safe in the console now, but do I need to remove the entire center console to get at the bulb. Just to charily this light is to illuminate the gear selection on the automatic transmission.
Thank you in advance for all of your input
Tackleberry

 

Not sure how to access the bulb (I drive a stick ) but a flickering bulb sounds like a loose connection. Probably just have to get in there and reseat the bulb, maybe add a little dielectric grease while you're at it.

 

Easy fix,
Unscrew the shift knob
Pull up on the plastic piece that the shifter comes thru
The next piece of plastic over the light has a clip on front & rear, under that is the bulb

remember to pull the little orange condom off the old bulb, (not included with bulb)

 

DIY with pics if you need it. Same as what sparky said

http://www.tacomaworld.com/forum/2n...ce-your-automatic-shifter-indicator-lamp.html

 

Thank you very much, took me 5 minutes to do, save 99 dollars. Thank you

 

Thank you for the pic, it was really easy, save me a lot of money, for 5 minutes worth of work. Pics really helped, thank you all again