What Have You Done To Your 2nd Gen Tacoma Today?

OME lift is definitely worth it. I think there's a ongoing group buy to get the new kit

 

If there is where's the thread

 

Sorry had to look for it. Talk to Ben. He's a awesome guy to deal with.

http://www.tacomaworld.com/forum/2n...e/317754-prinsu-design-studio-roof-racks.html

 

Yes please, I am curious how you did it.

 

Love the cover, have same one. Im going to make a few recommedations though as I have busted mine.

1. Tie the last section down when its in the up position, it will break the foam board i side from the wind slamming it shut!!!!

2. In a hail storm, open it up all the way, it dents pretty easy. No way of fixing that.

3. Lube the seals every once in a while with silicone, they will dry rot and leak.

Those are my thoughts from owning one.

 

thanks for the recommendations. i wont have to worry about hail here in Florida though

 

Started and finished a mini d2s retrofit yesterday. I am accustomed to proper hid projectors now that I've retrofitted 4 of my cars and trucks. I just couldn't live with my taco staying halogen.




Here's another mini d2s retrofit I did on my 94 pickup. These headlights were a million times easier to work with than my 2nd gen.

 

When you say new kit, are you referring to the new coilovers and resi ome is coming out with

 

No it was the Nitrocharger sport 9001 or something like that

 

I'm waiting for the new ome kit.lol

 

I'm curious about the new kit as well. I have OMEs current offering and it's pretty much new, so by the time I'm ready to replace it there should be lots of reviews around. Excite.

 

How does it sound?

 

finally did the armrest mod and wrapped the door pulls while I was at it. came out pretty awesome I think:



other door pic in build thread.

 

New to Tacoma World and modding my truck. Did a 3" lift, blacked out tail lights, retrofit headlights, color matched grill, fuel hostage 17x9 rims with 285/70/17 Nitto g2s and of course the weather tech floor mats. Thanks TacomaWorld for all the suggestions!

 

Got her a little bit dirty!

 

I built a front wheel bearing/hub assembly yesterday. Today I decided to swap it out. Thought it was the driver's side. Got in there and noticed the inner seal was still fine.... Left the seal but swapped the bearing/hub. Still noisy. Tear into the passenger side sure enough seal is smoked and the spindle is full of crap. Swapped out the seal and put the original bearing/hub from the driver's side on. Silence once again.





Then I gave it a bath



Now I need to rebuild that BMW diff and get that back in my E30.

 

Sunday fun day

 

Welcome, truck looks awesome. Hope youhave a fat wallet cause this forum will empty it!!!!

 

Ain't that the truth!!

 

Working on it. imovie has been a jerk this weekend.