Keystone State Thread

Basically. I have my LED light bar behind the bumper and its wired so that the relay pulled power off the high beam signal - it only works with the high beams on. I have a switch between the relay and the light bar as well so I can turn the light bar on/off so its not always on every time the high beams is on.

I would NEVER leave a light bar on when there is a car infront of you or on coming traffic. I basically use mine on back roads or in the woods

:beer:

 

I got harassed by Ross twp. every time I would take my ST there which was a lot as I live right by the beginning of McKnight Rd.. Ohio Twp. was another one that would bother me about everything on my vehicle not being factory.




Meanwhile you see jeepers driving around with their tires sticking out way past the fenders and all kinds of street illegal mods done with no cops ever bothering them. That and the fullsize trucks with sky scraper lifts and wide tires and wheels but I've never seen any of them pulled over either.

 

I know damn well I'm getting pulled over once I get done with my SAS, V8 drivetrain swap and running 37's. I've already got the sticker made for the bottom edge of the driver door, it says "I know I know, License and registration." This has been the name of my truck for years.

 

North Hills cops are the worst.

Everybody knows that Jeeps have to run those wheels with those horrible offsets so they dont flip over

 

I'm from butler south of slippery rock. North of Pitts. New member

 

Howdy.

 

Buckin' Futler!!!

 

MEEP

 

Welcome

Meet coming up if you're interested. http://www.tacomaworld.com/forum/north-east/352301-monthly-pittsburgh-meetup.html

 

Hi everyone, I'm looking into purchasing some 4x innovations sliders for my dclb. I live in PA delaware county area and would need a shop to weld them together and on to my truck. I have absolutely no experience welding and do not know of anyone that would weld them together and then on to the frame of my truck. Can anyone recommend a reputable shop in the area? I don't really want to take it to just any old mechanic considering they'll be welding them to my frame. I figured I'd post in the PA thread rather than the 2nd gen Forum just because of the location specific question. Thanks!

 

Thanks man. Next time you see it, it will be completely different. LOL might be awhile though.

 

I'd ask in the NJ thread. They're all a little weird over there but good people. There are a few that do fab stuff too.

 

For a shop, DeCordre Auto in Spring City. He will Tig that shit up. He's done amazing work for me.

 

Thanks for the info guys. I'll look into DeCordre. Also going to post in the NJ thread to see what they have to say. Any idea on how much he would charge me to weld together and weld up the sliders. Ballpark figure? Thanks again! Hoping to see some of you guys at the next Rausch meet. Hence the need for some sliders lol. Hopefully the DCLB won't be too big for the trails you guys run.

 

Sarver and South of Pgh here.

 

My buddy Bryan lives in upper Darby and had someone down that way do his for him. - same brand too.
I'll get him to post up the info for you.

 

I went to two different shops here in Clifton Heights.

The first was a shop by the Primos train station whose welder took a crap on him the day I came in, so he recommended Mike at Motion3 behind the Lotsa Pasta pub. $350 to get them done. Photos in my gallery.

PM me for phone numbers.

 

Thanks, that would be great. Gives me a little assurance that they were the same brand too. I figured some shops might be reluctant to weld them together considering they come in few pieces.

Thanks! Pm'd you for the phone number. Did you use 4Xinnovations sliders too? If you did, did the $350 include welding them together and then on your frame? Sorry for all the questions.

 

That part of the video look like it was filmed on route 61 in between Hanover and Pottsville...

Was not me.