additional D rings

I installed a rollbak toneau cover. The original tie down cleats had to be removed. I need info. adding extra D rings. Any suggestions?

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/30142-additional-d-rings.html


or if you search using the search feature, about 1000 threads will show up.


and welcome!

 

Under the bed bolts at the cab and center. Several places to buy them, Harbor Freight has them for under $10 bucks for 2. You may have to drill the hole larger. One of the best and cheepest mods you can do.

See post # 3
http://www.tacomaworld.com/forum/technical-chat/4838-cheap-free-mods.html

 

Part Number


You can take out an existing bolt and install a d-ring. Some modification to the bolt will need to be done. Minor. Nothing a dremel can't fix.

 

I was about to add four d-rings to my bed at the bolts on the floor when I started reading the instructions which came with them. The d-rings were purchased from a Toyota dealer. I have attached a copy of the instructions. Let me hear some feedback. I like placement of these d-rinds but would like to hear of it would compromise the structural rigidity of the bed where these will be attached.
Thanks
RC