CMR needed for 35's

Live in lake county need to know a good reputable SHOP that can do a CMR & do it the right way. Please help. Got a new set of wheels I'm trying to install ASAP

 

Shaffer’s off-road or Stellar.

I don’t think any shops are open on the weekends and may not get you in as fast as you want.

 

Appreciate it @pr0b been asking around mostly all decent shops are all in Sactown. Thanks brother

 

I had to trim my fenders and hammer the wheel wells a bit to get them to fit at full compression. You're running a different setup so YMMV.

 

@10YSON absolutely I did that already. I knew that had to be done to achieve 35's it was just a matter of time till I got my grails.

VOLK 37XT PROGRESSIVE
16X8 -20 bronze
315 75 R16 tires

 

you dont need a CMR for 35's.

 

@Brian422 Currently I'm running this set up with a CMC tires are still rubbing

Wheels: SCS GEN5 17X9 -38
Tires: 285/70/R17

 

The wheels are the problem. The perfect offset for no rubbing is -12 4inches of backspacing. Of course I’ve got a +2 long travel kit and don’t rub either.

this was before LT

https://www.tacomaworld.com/threads...-love-alignments.594309/page-80#post-27187638

 

@Brian422 thanks for the input very well appreciated.

 

Go to our buddy Milo at Milogen Fabrication in Milpitas and tell him Vin from SCS referred you. He's very familiar with the setup you have and will get you the proper clearance without needing to do a CMR. His CMC is very different and much better than most shops here in the Bay Area. Our 17x8.5 -10mm would be easier to clearance for, but that -38mm looks killer. You just have to be willing to put in some extra effort to make it all work nicely.

https://milogenfab.com/
contact: Milo@milogenfab.com

 

@SCSPerformance I'm truly considering your suggestion. Cause the CMC I did was done in my uncle's shop him & I did it. Feel like I definitely need a lil more aggressive CMC. Love my GEN5's plus I also want bigger tire set up.

 

+1 for Milo. Top notch shop and great dude.

 

if you still need a shop, beeps offroad in Hayward.

 

Got mine done at supremefabworks in Sacramento. Good people highly recommended.

 

I am running -38 offset wrapped on 35s with no rubbing except on full flex on the trail maybe. Did my C4 body mount relocation at Shaffer's in Union City.

 

3rd Gen