1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Squeaking brakes

Discussion in '2nd Gen. Tacomas (2005-2015)' started by el_smurfo, Aug 5, 2017.

  1. Aug 5, 2017 at 12:33 PM
    #1
    el_smurfo

    el_smurfo [OP] Well-Known Member

    Joined:
    Oct 22, 2007
    Member:
    #3179
    Messages:
    243
    My brakes squeak almost every time I stop. They have done this for years, in spite of multiple visits to mechanics. Some think it's dust and blow them out but it doesn't help. They probably have half the pads still, and it seems that they do it less in warmer weather and stop an i press harder as i finally come to a stop. Any advice?
     
  2. Aug 5, 2017 at 12:49 PM
    #2
    Plain Jane Taco

    Plain Jane Taco Well-Known Member

    Joined:
    Apr 19, 2009
    Member:
    #16179
    Messages:
    40,279
    Gender:
    Male
    USA
    Metallic dust can sometimes cause squeeking. You could try removing the pads and sanding them a little. Sometimes that helps.

    But frankly....if you're going to the trouble to remove them you might as well replace them with some new ceramic pads. They tend to be quieter
     
    Skyway likes this.
  3. Aug 5, 2017 at 1:22 PM
    #3
    Skyway

    Skyway Well-Known Member

    Joined:
    Jun 28, 2016
    Member:
    #190731
    Messages:
    2,947
    Gender:
    Male
    First Name:
    Ande'
    St.Pete
    Vehicle:
    White 2009 regular cab
    He is right on it!
    Metallic Pads are your issue, they are fine... :headbang: Turn that radio up!
     
  4. Aug 5, 2017 at 1:45 PM
    #4
    Bebop

    Bebop Old fashion cowboy

    Joined:
    Feb 11, 2016
    Member:
    #177835
    Messages:
    4,407
    Gender:
    Male
    First Name:
    Nick
    Castle rock Colorado
    Vehicle:
    2012 Toyota Tacoma baja
    6inch lift sitting on bilstein coilovers. Lexus is300 studs in front to keep stock wheels, general grabber red letters, nfab front bumper.
    New ceramic pads, lube the back of the pads and clean and lube the slide pins. Problem solved.
     
  5. Aug 5, 2017 at 3:23 PM
    #5
    ABNFDC

    ABNFDC Well-Known Member

    Joined:
    Aug 29, 2016
    Member:
    #195902
    Messages:
    978
    Gender:
    Male
    Granite State
    Vehicle:
    2008 4WD Access Cab TRD OR "Rugged Trail"
    265/75/16 Wildpeaks, Dakar rear, HS 2.5" front coils
    OP, you mention in the thread about the Superior helper springs that you could use some experience wrenching on things. Here is your chance for a simple fix. Do as Bebop said, new pads, lube the back, and reassemble. See the DIY thread here: https://www.tacomaworld.com/threads/how-to-change-front-brakes-pads-and-rotors.353082/ Takes maybe an hour and all you need are basic hand tools.

    I recommend getting new pins, and assuming your truck is a 6 cylinder 4x4, the Duralast Gold brake pads are inexpensive and decent. I'm using other pads now, but have used them on a couple different trucks and was completely satisfied.
     
    el_smurfo[OP] likes this.

Products Discussed in

To Top