Pelfreybilt- Suggestions, Likes, Dislikes, Feedback +/-

Hey Satin,
Just a few things I've though of recently that may be appropriate here.

1. Stickers. I know you guys have the vinyl stickers with backing on both sides where you have to peel, stick then peel. I tried putting one of those on my tool box but it doesn't stick to it. Any other or new stickers out that might work?

2. I've seen guys attach screw/bolt on bottle openers to the front or back or their trucks. I think it'd be sweet if you guys had an option to add a CAD file cutout for a bottle opener that people can choose to have added anywhere on their front or rear bumpers.

3. When folks install your front bumpers there ends up being that hole in the lower radiator support area. Maybe offer a simple frame cap for that area to finish it off using factory bolts.

I don't know. I'm sure others can chime in and offer input. Just spit balling ideas.

Nate

 

Nate...not to take away anything from Pelfreybilt, but if you need those frame cap ends you were mentioning, you can get them from here:
http://stores.streetacos.com/frame-plugs-05-tacoma-with-front-plate-bumper-bolt-on/

I'm sure Tyler could make them in his sleep, but there are so many things in a broader scope he is probably focused on...

 

Thanks! Never knew they already existed. Disregard my last. And I'm sure he'll be busy with the 5th gen 4R and new Taco on the horizon.

 

Thank you so much for the input, Nate, we truly appreciate it!

1) We actually have a "puffy" stainless looking sticker that might work better for you!? PM me your mailing address & I'll send ya one!
2) Love the idea & I took this to Tyler a few years ago... However, we can't produce them here in the USA as cheap as people do when they have them made in China-so Tyler's not interested in doing them... pretty sure people won't pay the price for what they cost to manufacture here & we're not interested in selling a product made in China!
3) Mind taking a photo of what you mean & emailing it to me so i know what you're referring to? Please send to: satin@pelfreybilt.com

Again, thank you for taking the time to share your thoughts! Truly appreciate it! Appreciate all of you so much

 

Any new pics/updates on bolt-on sliders?

 

Customer hasn't shared pictures of them installed yet-but maybe tomorrow or Monday we can have pictures?

 

Hey! hey!
How goes the battle?
Was wondering what the largest size warn winch was that would fit your bumpers.

 

Here's the winches we recommend for our bumpers: http://www.pelfreybilt.com/#!winches-factor55/c8nd

Let me know if you have any other questions

 

Thanks for the link.
I was looking at the 05-11 plate bumpers and still couldn't find info on winch fitting. I believe you guys sell the zeon 10 which is what I am looking at for a winch. I know the winch foot prints are close to the M8000 but the chasis are bigger.

 

This winch will work with our bumper, it just requires that you purchase the long relocation kit that's listed on our website... because the solenoid has to be relocated!

 

Excellent! Thanks for the info....now to just come up with some funds.

 

Ideal rear bumper would be one that sits up high an tight in the OEM location with built in hitch and anchor points. Anchor points would be useful for rappelling. Know most would not use or need anchor points, but for my usage it would be really nice.

 

So in moab im winching loco up the cliff after he rolls his truck. His winch is connected to my bumper my winch is connected to his. My truck is perpindicular to his though so my truck is being pulled down into the ground. My front wheels were chalked with rocks because I kept getting pulled forward.

After getting him up the hill my bumper was pulled down about an inch. Eric (relentless) helped me remove my bumper. Turns out my frame mount holding the bumper on bent. The relentless frame to bumper reinforcements were not enough to suspend a truck off the cliff. Tyler from pelfreybilt saw the damage in moab and suggested he could send me his re-enforcement plates and I could run both for double the strength. Eric helped fix my frame mounts in moab and it was all good.

Keep in mind I have never ordered anything from pelfreybilt. This week they had the 4th of july sale. I ordered a small fuse block pannel and didnt think much of it. That night Satin Pelfrey reached out to me asking if I still wanted frame plates and they would throw them in with my ordered because I bent my frame winching someone who was a customer of theirs. Now that is customer service.

Thank you Tyler and Satin. I look forward to see you guys in moab next year.

 

Tyler, Satin and Eric = Quality people.

 

Thank you so much, Nick, for taking the time to write this very kind review. It was our sincere pleasure to help you out & we truly appreciate you helping our customer & friend! Thanks again-this means more than you realize

 

So, about a 1st gen bumper...

 

So, about that next 10% off sale...

 

We're talking about adding the 1st gen to our product line in 2016 so stay tuned

 

Email or PM me what you're looking for... We literally just held a 4th of July sale satin@pelfreybilt.com

 

I know, and I literally just purchased a 2015 DCSB about a week and a half ago! haha.

I will email you shortly.