Suspension Lift Info includes pics

I bet you got the answer to me? My rear leaf springs are worn out, I mean flat I heard about airlifts. how do you feel about them

 

Where can I order OME suspension kits? I was going to order from rock road outfitters but have read some pretty bad reviews. Any help would be appreciated

 

Wheelers Off-road, Headstrong, Down South Motorsports...

 

I have read multiple users say that differential drops are a waste of money and even seen pictures of severe damage they have caused to Tacomaworld members trucks. Other than that pretty solid writeup

 

Hello all,
I recently purchased a used 6" kit for a steal. Only problem is that I don't know what brand and what a couple of the pieces are. This appears to be an "above coil" spacer kit using stick shocks and some extremely long test shocks that dont have any mfg markings. I'd like to replace the front and rear shocks with bilsteins but obviously don't know how to find out what part number to order. Also does anyone have an idea how to determine the brand of this kit?
Thanks,
Sparkie

 

Geez!! I'm having some serious spelling issues.... I meant to say "STOCK" front shocks and "extremely long REAR shocks...

 

pictures would/might help. We might be able to detective this shit for you.

 

I posted a pic of the lift kit. It's in my gallery. (Sparkies coma) the pic is entitled "nameless lift" lol

 

Toytec... they do good prices and fast shipping

 

Is it just me or does this look like stock suspension with an above coil spacer?

 

Whats up guys, trying to decide on a simple but good quality and decent height lift for my 03 tacoma. Here are 2 that ive narrowed it down i think. Gonna be putting 33s" on once lift is on. just wanna know what you guys think of the two and which one is better for the price and durability. preciate it

https://bilsteinlifts.com/shop/95-0...table-lift-kit-with-5100-shocks-95-04-tacoma/

or

http://www.suspensionconnection.com/529043.html#Reviews

 

Subd

 

All Pro Standards

Icon 2.5 RR on all 4 corners,
All Pro Standards,
Icon Billet UCAs,
Dirt King (Factory Length) Lower Control Arms,
MaxTrac Lifted Spindles,
SDHQ Limit Straps,
Here she sits with the COs set at 0.

Tires are GoodYear Duratrac 285/75/16 on 16" L8 Strike 6s W/4.5" BS

Dead Even Front to Rear -


.

.

.

.
Icon Billet UCA + Icon EXT Travel 2.5 Remote Resi (Set For Zero Lift) + MaxTrac Spindle

.
SDHQ Limit Straps


.
Dirt King Factory Length Lower Control Arms

.
All Pro Standards + Icon 2.5 Remote Resi (0 - 3" Lift)


Kinda happy about how she turned out, with the COs set at Zero the ride feels very much like my drift spec 350Z that was equipped with full Tanabe suspension . . . Well except with more more ground clearance and the desert running at a lil bit of speed.

 

I just purchased my first Tacoma on Tuesday and was needing some input. It's a 2015 DCSB fresh off showroom floor. I know the answer to my question is in these post somewhere, but after reading so much everything starts to run together and I end up with even more doubt about what I thought. I hope this question isn't too elementary for everyone here, but if I purchased this ToyTec lift, is this everything I need? It says it works will stock shocks and springs. This will be my daily driver and I do not plan to be offroad much at all. How bad will my factory ride be compromised? Any help or suggestions are appreciated.

 

This is fine for lifting but the add a leaf in the rear will still leave your rear end a little higher. If u just want to level off the truck for slightly bigger tires, use just the strut spacers in the front. If u really wanna do it right and spend a little more money, do a spindle lift. Camburg, CST, or maxtrac all make spindles for this truck if it's not 4x4

 

Good info.

 

Would this be a good entry level lift with stock shocks and UCA's? I don't do hard core offroading, just driving around the lease and I just want the truck a bit higher and just use 265 duratracs. I'd decline the top spacer option as well. Would I need to purchase the 1/4" spacer for the drivers side lean? http://toyteclifts.3dcartstores.com/NEW-3-Lift-With-front-coils-rear-options_p_233.html#

 

To much lift for 265. Tires will look tiny with that much space, perhaps you can put 265/65/17 with stock suspension. I've seen stock with 265/70/r17 but then tires looks to bulk with little space.

 

If I get a 3" Lift kit and 285 tires will I need New UCA's? I have a 2008 Tacoma sport

 

You won't NEED them, but you should definitely get them unless really can't afford it. I don't have them, but kinda wish I had gotten them.