What Have You Done To Your 2nd Gen Tacoma Today?

Which rain visors do you have there?

 

Got an alignment after installing new front springs yesterday.

 

How much $$?

 

The set was just under $138 bucks with free shipping from eBay.

 

Gaining some altitude today.

 

you might like these....
scroll to the last one
type D

https://www.tacomaworld.com/threads/dezert-toy-fabrication-prerunner-bumpers.306101/

 

Decided to take the flag off the house and put on my Tacoma. I'll be flying Old Glory all weekend.

 

Also installed Redline Tuning hood struts. Was an easy install. And the guys and Redline Tuning were great to deal with. Upgrade your engine with this easy mod.

 

Decided to add another pic of the flag. Here you can see the custom decal Ghost made me.

 

Just installed my Redline struts as well, I love em. Did you do the tailgate EZ drop as well? Or just the struts?

 

No. I didn't see they had them. That will definitely go on my list. I'm gonna go check them out now.

 

Well I am most likely selling mine... went to install it, and one of the stock Hex screws on my tailgate that needs to be replaced by one in the kit is stripped way beyond belief...

 

Cut a line across it and use a flat head bit. It's worked for me several times.

 

Wives just don't understand!!!

 

Do not order the ez tailgate drop thing. I'm pretty sure, unless there was a redesign, that many people had trouble fitting them to the truck and ended up not using them. Search for the problem on here before you buy it, just a forewarning

 

Auto Ventshade in-channel visors with a pin stripe that I added.

 

Love the backrack,

First question is height, you think you could send a photo of a side shot?, curious on how far above the cab it

And did you opt to drill and mount directly to the rails because of the tonneau cover?

I thought they made one for the Tacoma bedrail mounts.

 

Bought a Pelican Tidewater Angler Kayak last week for my girlfriend to join me on my adventures.

 

Yep this seems like the best option and has worked for me many times too. Can also carefully weld a nut onto it, but given it's probably up against plastic or close to it I wouldn't suggest going that route lol.

 

I agree, I bought mine a few months back, it is a bad design. I should've checked with TW prior to buying it. What a waste of money IMO.