*THE RTT Owners Thread (With BS)*

We generally family camp with several other families for several days and take a lot of stuff. I have a TON of camping equipment. Several large coolers, camping gear boxes, 4 bicycles, firewood ect. It's quite ridiculous really but it makes things more enjoyable for the wife and kids. Here is the truck & trailer loaded for a 2 day trip. lol

Thanks. I made the bed rack for my taco first and then made the stand for the trailer fit the bed rack so that I could use it either way.



This trailer serves many purposes, my dad & I built it approximately 22 years ago out of a trashed out pop up camper frame. Everything I add or make for it I try to keep easily removable so that it can still serve as a trailer. I have a lot more planned for the RTT rack to help with storage and functionality when it's set up in "camping mode".

Same trailer decorated for my daughters girl scout troop in the local Christmas parade.


Same trailer trick or treating in style.

 

For 2 days?? I thought I took a lot... haha

 

Lmao. I'm taking the family out this weekend for the gran sabana maiden voyage

 

I said we pack a lot
And actually it was for 2 nights

 

Won this thing at Rock Therapy this year. Can't wait to get out and use it outside of my backyard.

Thanks CVT!

 

I should have gone to rock therapy... Nice tent! Congrats!

 

So many awesome raffle prizes at RT!

 

Next year for me! Graduation present to myself

 

I'm hoping to come out 2017

 

That fits great up there. I hope you get to use it soon! @NYCO @lotsoftoys

 

Hey what is the best way to contact CVT? I emailed them about a week ago and haven't heard back.

Is there any member that is a rep on here?

 

Matt, I would just give them a call. The shop number is 541-312-8368.

 

Wow I'm an idiot. I honestly didn't think of calling them. These all nighters while I finish up final exams are clearly getting to me...

 

I need some help from my fellow Rtt. So headed out for the first time this weekend. And upon packing up I noticed I had condensation on my mattress and floor but only in the middle along the seam. When I got home I took out the mattress and opened the windows to air it out. When I looked at the seam I noticed that my base is curved and only the ends are sitting in the channel. Awhile ago I mentioned it looked like my tent had been backed into something. I straightened out the hinges and all looked good until today. And this is where you guys come in. I need some ideas on how to take the bow out of the base. The bow is probably 3/8 - 1/2?

 

Can you post some pictures of the bow?

 

The bottom based attached to the bed rack are still straight

 

That bend will be very difficult to remove. If it was up or down it would be as simple as a straight piece of metal, some 2x4's, and a c clamp. Bowed in you're either going to have to disassmble it or tack on some tabs and use a bolt to pull the center out. That said, if the bend is not affecting the stability I would leave it. I would run grab some weather strip foam to seal the gap while open. Something like this

$6 Frost King R734H Sponge Rubber Foam Tape 3/4" W X 7/16" H X 10' L, Black

http://www.amazon.com/Frost-King-R7...&qid=1433747214&sr=8-2&keywords=weather+strip

Your other option would be to grab a new floor from cvt. They start at $550 though. I would give them a call and see if maybe they replaced one for a customer and maybe the half you need was good or better and you can get it from him for a steal.

 

Also if you do attempt to straighten yours, dont push or brace against that rib, if that bows out you're SOL

 

I don't think the bend is as severe as it appears in the photos. There is clearly some "fisheye" going on with the photos. If it were mine I would open up the tent and put something solid underneath that will support a bottle jack. Then use the bottle jack to carefully "lift" the bent area just a little beyond flat since it will settle a bit once the jack is removed.

It should straighten it out. After that it's important to make sure that the tongue and groove of the to base halves are seated properly when the tent is setup in the future. That will keep it from bending. Only other thing I can think of is to lose some weight.