Does 2nd gen trailer hitch fit and model tacoma???

WIll a 4x2 hitch fit a 4x4 with ext or double cab or single cab? I would think they are all the same.

 

Good question. I would think it would be more model year than wheelbase so wait and see.

 

I don't know, but I can take a photo of how my OEM hitch mounts to the frame on my 4x4 DCLB if it helps any.

 

pretty sure any 6 lugger OEM hitch should bolt up to any 6 lug frame. The differences in wheelbase is done in the center section forward of the front leaf spring hangers.

 

That would be very helpfull! Because im looking at this one on ebay http://www.ebay.com/itm/231555627843?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT the seller told me its off a 4x4 although the truck looks like it has a 2.7l engine and the hitch does not look like it will mount to my 08 access cab 4x4 4.0l....

 

I take it 2.7l tacomas are 5 lug then?

 

That doesn't look like an OEM hitch to me. This is the factory hitch which came with my 05 DCLB 4.0. The ends are completely open and have 5 bolts on the flange. Also there's a separate angle bracket (first photo) Not sure if you were thinking that's an OEM part on eBay. Plus the light trailer light hookup cap doesn't look OEM.

 

Not all 2.7L are 5 lug. They made regular cab and access cab in 6 lug with 4wd and also prerunners in access cab and double cab that were 6 lug. Also, hitch was not a standard option on 2.7L, although you could pay an absurd amount of money for one from dealer. You're better off buying a Reese or Hidden Hitch new. I paid $120 brand new for a Reese Class III from Pepboys on sale.

 

I agree, that's not an OEM hitch. It might have come off a Tacoma but it's not factory.

 

yeah like stated, the I4 6 luggers never had the option for the class IV hitch from the factory (for obvious reasons) The ball on the bumper would suffice just fine for the tow rating of the I4 6 luggers.

 

The truck pictured in the eBay listing is indeed a 4x4. Regular cabs came only with the 2.7L. The hitch will fit your truck. Looks like you will have to furnish your own wiring, however.

 

I have compared the configuration of that one with my fram and it deosnt seem like it would fit. it doesnt sit low enough to clear the bumper...

 

Further research shows the hitch to be part of a Toyota accessory kit, P/N PT791-04050. However, it's missing the large frame-attachment flanges. Here's what a full kit looks like (dealer listing): http://www.ebay.com/itm/NEW-OEM-TOYOTA-TACOMA-CLASS-III-TOW-HITCH-RECIVER-/251550491751



I recommend messaging eBay seller easternautosalvage and ask if they can pull the frame flanges from the wrecked truck. Worth a shot since $50 is a pretty good discount compared to almost $300 for a new kit.

 

I just went with a Curt mfg hitch for my 2015 that didn't come with one. It was under $200 with a harness on eBay. The dealer wanted a lot for a factory one.

 

Thanks! this helps alot. And i did message eastern salvage but they are not willing to remove the flanges unfortunately.
They mentioned some one returned it because it didnt fit... now they know why.