Bed seems tilted?

Maybe my OCD is just getting to me but was curious what you guys think. I did search for this first. The right rear of the bed on my truck looks like it is canted downward. Doesn't matter if I am on flat level surface either. I thought originally maybe my parking spot, checked it in several places and snapped a pic at my friend's house yesterday. All of my searches brought up only if the bed was misaligned. Does this fall into that category? Pic is probably not that great. Anything I should worry about or am I being paranoid?

 

Taco lean?

 

I thought that was drivers side and the front? This is just the right rear of the bed

 

I swear if y'all don't just start driving and enjoying your trucks.. I have a '93 with bondo on every panel but hey, it's a truck and it runs like a scalded dog. DRIVE the darn thing.

 

Im too scared to drive mine....Sorry OP, i have no real knowledge of anything "wrong" with you truck.

 

Taco lean. Doesn't make sense but I'm sure it is

 

My neighbors new trd sport same thing, looked underneath and one leaf pack is flatter than the other. He's going to have them check on next oil change

 

I do drive it. I do enjoy it. In fact, I love the truck. I just am new to it and want to make sure it couldn't be part of something more serious. It is a used vehicle and I don't know it's actual history. Only the original owner does. I don't rely on the dealer to give me proper info, I rely on the community who might have much more experience than me. I have seen cars with interesting things and they at times turned out to be frame damage or something else bad. Just wanting a little reassurance or info is all.

 

Hope so, thank you for the reply.

Ah, interesting. Maybe I should actually try taking a look. I think I will have the dealer take a peek as well since I need to go there soon any way.

 

Did you check it with a level and a tape measure? just measure the height of the bed on each side and see if they are the same. I'd do the front and rear of the bed.

 

I will measure today before I leave the house. Measure to top of bed side?

 

Put back a few beers and then take a look. The beer tends to level it out.

 

I like this solution....

 

I would measure the top of bed to ground.

I would check your bumper also as it looks a like there is less space between the tailgate and it on the left side

 

Will do, never noticed that bumper space either. Thank you

 

no problem. I'm also like that... everything must line up properly. good luck

 

Yep, bumper misalignment.

Had the same thing when a hitch was installed.

 

Likely a quick fix?

 

Yep. Loosen the mounting bolts, readjust and tighten.

 

Measure from the top of the bumper to the bottom of the plastic on the taillight cover at the same exact point on each side, and tell us what you find.