Trd flares mounting questions

I would like to put 01-04 trd flares on my 97 tacoma. I know I do not have the mounting holes needed curious if anybody has mounted these on older tacoma. How the mounted them methods used.

 

Personally I would probably trace the mounting tabs from the flares on tracing paper and then tape the paper to the truck and drill,file the holes (don't forget to paint the hole to avoid rust).

 

I just read on a old thread that one member mounted them no problems with out the mounting tabs/holes

 

curious how many people have done that?

 

Me on my 98. No holes drilled, just install using the factory holes inside the fender wells.

 

those are the 98-00 flares not the bigger 01-04 flares

 

or go aftermarket, but those are horribly expensive

 

Sub'd. I want t do this on my '00

 

If you want big fender flares and that are cheap.. check out jungle fender flares.. about 300 bucks for a set of 4.

 

wondering how you made out installing the 01-04 flares on the 98-00 looking to do aswell.