Fender Rub

So I just recently installed an ICON Stage 2 suspension kit on my truck and slapped some 33" BFG All Terrains and 17" Pro comp wheels under it. I immediately noticed the mud flaps were rubbing when I would turn so I removed those and thought that would fix the problem. Now that I have free time I have been doing trails in my area a lot and I noticed that when a front wheel is compressed up from a rock or whatever obstacle I get a slight rub on the fender from my tire. Is this something I should be worried about? Will I rip off a fender or just hear a scary noise?

 

Cab mount chop.
Used to fit bigger tires and fix rubbing issues.

 

Do you know how much that would run me on average?

 

Usually $100 if you have a local vendor near you. I would check to see where you're rubbing first and fix what you can right now. I've popped a few fenders, just pop them back on.

 

Really depends on the shops in your area. I've seen quoted prices from $100 to $475.
If you're able to DIY, this is a good thread to reference.
https://www.tacomaworld.com/threads/b-a-m-f-cmc-plates-cab-mount-chop.192527/

 

How much front lift did you get with your icon setup?