TRD supercharger

Do they have to be trd injectors or just larger injectors period?

 

TRD If you're not adding more boost and mods, larger injectors at the same level as TRD injectors or larger if you are adding more stuff

 

Question for you guys that know your shit.....

I'm lookin into getting a boost gauge ....I don't want one with a digital readout. So all I need is a simple mechanical one correct?
As far as the hookup, I know where the port is. Is it as easy as running the tube to the port on the s/c? Are there any other wires I need to worry about?

 

Would that power wire(illumination) need to be spliced into something or straight to the battery?...or is that a matter of preference type thing?

 

Gotcha

 

The illumination circuit is backwards iirc..... It like uses resistance on the neg wire to dim or some shit and ppl have had issues tying into it.
Use an add a fuse and tie into...... Washer fluid, iirc.

 

There are still two SC and fit kits in Vegas at Findlay Yota. $5732 after tax.

 

Rip off these days. Again, anyone that buys the things for over 5k is wasting money. That's had better be $5732 installed lol, and even then that's a bit steep.

 

Anyone running a 30" led bar in your lower valance?

If so did you have to move the recirculation pump that's behind it?

Thanks

 

Curious myself

 

I have one sitting in my room begging to be put in...

 

I think it would fit just fine, if not, you could easily move the pump up and get some new straps for it.

 

It looks like it will fit maybe be real close but should work. idk I can't decide if I want to sell the bar or put it on

 

Worst thing that happens is you get in there and the bar doesn't fit, so then you have 3 choices, you either make the bar fit somehow, maybe cramming it against the bumper or something, or you just move the bump enough to fit the bar in there, or you just veto the bar and lose out on life.

 

It's a rigid an amber an snow is around the corner here I'm prob going to mount it. Just gotta get the mounts now

 

I'm going to give it a shot most likely so we will see
The rigid mounts I think push it far enough foward to miss the pump but only doing it will figure this out I guess

 

Well I just bought one of the two superchargers (+ fit kit) from Findlay Toyota for $5473.11 shipped & insured to me in MA...

I thought they were discontinued? Compared to Longo Toyota's $8500 price tag, I thought $5500 was a good deal. Hunted around a lot and was happy to even find that Findlay had them.

 

Congrats you'll enjoy it. They are, it's because people can't justify paying that much for it, let alone about $6k without install but that's probably anyone's best bet at this point unless they can wait for magnuson to put out their 4.0s.

 

Yea, I verified that I am receiving both the supercharger (PTR29-35090) and fit kit (PTR29-35120).

 

i got a led bar in my lower bumper and it fits just fine didnt have to move it or anything. i made spacers to put under the angle iron i used to mount it to. the iron is bolted to the crash bar need pics?