Pelfreybilt Off-Road

Didn't realize you guys had the blue sea fuse panel plates!! Just ordered one better than me cutting out steel plates!!

 

10-12 or less... Almost caught up from the delays we had last year so will be 8-10 and dropping in 2016

 

@Pelfreybilt how do you like the linex on your sliders of your 4runner? Curious if it is too rough if my girlfriend drags her leg across it or something.

 

Will a Warn Zeon 10-S fit without any modification to the bumper or winch?

 

You can ask the installer to make it smoother or rougher to your liking

 

For those of you that have used the Camera Relocation Mount, did the factory wiring harness reach, or did you have to extend the factory wires, if so how did you do it? Cut the factory wire and splice on, or did you find the Molex connectors to avoid cutting the factor harness?

 

I just cut and spliced in some extended wires, not sure about everyone else though

 

@D.Mathys didnt have to cut his. He was able to get it to near factory location.

 

Yeah I almost had enough. I pulled and rerouted the wire loom to come out under the tail light and follow the swingout. Maybe 1/2 an inch short but close enough it don't even mater.

 

Thanks guys... I'll pull it apart this weekend and see. I have the Hi-lift mount on my HC, so I need to find an alternate location from the recommended.

 

With this relocate, do you just drill and tap the bumper and install the brackets and camera? Or does it mount another way?

 

I used double sided tape. Was going to be temporary to make sure the location was good but it's on pretty damn solid.

 

It's my rig, and as a woman I prefer it over powder coating because it provide a grip so my shoes don't slip!! I almost ate crap a million times in the Tacoma because of the slick powder coating! I would either do LineX or textured powder coating on them for sure!! Not too rough Oh & while you're thinking of your girlfriend (good job BTW!) pay the extra for the top plate, so her foot doesn't slip between the tubing! I love it!!!

 

I'll probably use rivets - that's what Pelfrey includes to attach the fold down table.

 

Thanks Satin!

 

Have you looked at grip tape where you would put your feet?

This worked great for me

$14 3M Safety-Walk Slip Resistant Tread, Black, 2-in by 180-in Roll, 7635NA, 2"

http://www.amazon.com/gp/product/B0006HVKM4

Even after bashing into rocks, it doesn't want to let go.

 

Quick question for anyone with a 2012+ Front plate bumper with center hoop.
What is the distance between hoop bars?
Scaling it on screen, it looks like 30".
What I want to know is, if a Rigid 28" E-Series Combo will fit.


Bolt to bolt is 30 5/8". If the legs were turned inward, could this be mounted on top of the bumper, within the hoop?

 

I pm'd Satin wondering if this would be too much weight on the tire carrier, but I'm curious if this would even fit with their tire carrier. Anybody know? or tried?

Its made for jeep spare tires so that you can attach a rotopax I plan on using it like the jeep below.

 

I'm digging the new logo!! @Pelfreybilt

 

whoa just noticed it. I like it!

Guess I'll have to swap my sticker now!